Positive-pressure aseptic isolator with sealed glove-access chamber

Aliran Laminar dan Peralatan Pengekangan

Isolator Aseptik Tekanan Positif

A sealed product-protection isolator that maintains filtered positive pressure around sterile operations and keeps room air outside the process chamber.

Positive Product-Protection Pressure
Unidirectional First Air
Closed Glove Manipulation
Aseptic Transfer Interfaces

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The positive-pressure aseptic isolator maintains the process chamber above the surrounding room pressure so leakage direction is outward after filtration. A ceiling HEPA supply creates unidirectional air over critical operations, and glove ports provide manipulation without opening the chamber. Materials move through bio-decontamination hatches, rapid transfer ports or compatible sterile connections. The design focuses on sterile product protection and is not used as a negative-pressure hazardous-material barrier unless specifically engineered for that combined risk.

Ciri-ciri Utama

Positive filtered pressure prevents untreated room air from entering through small leaks.

A full chamber diffuser delivers first air over open sterile product locations.

Glove access keeps operators physically separated from the aseptic zone.

Closed transfer interfaces protect supplies during ingress and finished items during egress.

Pressure-hold and glove-test connections support barrier integrity management.

Kebimbangan Produk Pelanggan

Product protection depends on positive pressure, clean transfer and unobstructed first air remaining coordinated throughout operation.

Room air enters during material loading.Interlocked transfer chambers and rapid ports separate loading from the main chamber.

Equipment blocks first air over open sterile items.Diffuser sections and internal supports are arranged around the critical process locations.

A glove leak allows direct operator contact with the chamber.Replaceable glove rings and integrity-test ports support planned glove management.

A positive chamber is assumed to contain hazardous powders.The product-protection purpose and pressure direction are clearly distinguished from containment isolators.

Permohonan yang biasa

Sterile component assemblyAseptic preparationOpen product protectionSmall-batch sterile manufacturing

Parameter teknikal

Typical configurable construction ranges for a positive-pressure aseptic isolator are listed below.

Bahan Teras	Welded SUS316L aseptic chamber with laminated safety glass and CSM or butyl glove assemblies
Ketebalan Panel	50-100 mm double-skin chamber and fan-filter sections
Lebar berkesan	1200-5000 mm usable aseptic process width
Panjang maksimum	Up to 8000 mm overall isolator length
Keluli Menghadapi Ketebalan	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
Ketumpatan teras	Approximately 8000 kg/m³ for SUS316L chamber material
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Electropolished SUS316L with welded radiused corners and clear viewing panels
Jenis Bersatu	Pressure-tight welded chamber with sealed glove rings, gasketed transfer doors and clamped HEPA filter frames
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Integrated vapor bio-decontaminationRapid transfer portsEnvironmental monitoring portsSingle- or multi-chamber configuration

Planning a Positive-Pressure Aseptic Isolator specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami