Positive-pressure aseptic isolator with sealed glove-access chamber

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

양압 무균 격리기

A sealed product-protection isolator that maintains filtered positive pressure around sterile operations and keeps room air outside the process chamber.

Positive Product-Protection Pressure
Unidirectional First Air
Closed Glove Manipulation
Aseptic Transfer Interfaces

견적 요청 제품 찾아보기

상품 소개

The positive-pressure aseptic isolator maintains the process chamber above the surrounding room pressure so leakage direction is outward after filtration. A ceiling HEPA supply creates unidirectional air over critical operations, and glove ports provide manipulation without opening the chamber. Materials move through bio-decontamination hatches, rapid transfer ports or compatible sterile connections. The design focuses on sterile product protection and is not used as a negative-pressure hazardous-material barrier unless specifically engineered for that combined risk.

주요 기능

Positive filtered pressure prevents untreated room air from entering through small leaks.

A full chamber diffuser delivers first air over open sterile product locations.

Glove access keeps operators physically separated from the aseptic zone.

Closed transfer interfaces protect supplies during ingress and finished items during egress.

Pressure-hold and glove-test connections support barrier integrity management.

고객 제품 관심사

Product protection depends on positive pressure, clean transfer and unobstructed first air remaining coordinated throughout operation.

Room air enters during material loading.Interlocked transfer chambers and rapid ports separate loading from the main chamber.

Equipment blocks first air over open sterile items.Diffuser sections and internal supports are arranged around the critical process locations.

A glove leak allows direct operator contact with the chamber.Replaceable glove rings and integrity-test ports support planned glove management.

A positive chamber is assumed to contain hazardous powders.The product-protection purpose and pressure direction are clearly distinguished from containment isolators.

일반적인 응용 프로그램

Sterile component assemblyAseptic preparationOpen product protectionSmall-batch sterile manufacturing

기술 매개변수

Typical configurable construction ranges for a positive-pressure aseptic isolator are listed below.

핵심 재료	Welded SUS316L aseptic chamber with laminated safety glass and CSM or butyl glove assemblies
패널 두께	50-100 mm double-skin chamber and fan-filter sections
유효 폭	1200-5000 mm usable aseptic process width
최대 길이	Up to 8000 mm overall isolator length
강철 면면 두께	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
코어 밀도	Approximately 8000 kg/m³ for SUS316L chamber material
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L with welded radiused corners and clear viewing panels
접합 유형	Pressure-tight welded chamber with sealed glove rings, gasketed transfer doors and clamped HEPA filter frames
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integrated vapor bio-decontaminationRapid transfer portsEnvironmental monitoring portsSingle- or multi-chamber configuration

Planning a Positive-Pressure Aseptic Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.