Positive-pressure aseptic isolator with sealed glove-access chamber

Laminar Flow und Containment Equipment

Positiver Druck-Aseptik - Isolator

A sealed product-protection isolator that maintains filtered positive pressure around sterile operations and keeps room air outside the process chamber.

Positive Product-Protection Pressure
Unidirectional First Air
Closed Glove Manipulation
Aseptic Transfer Interfaces

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The positive-pressure aseptic isolator maintains the process chamber above the surrounding room pressure so leakage direction is outward after filtration. A ceiling HEPA supply creates unidirectional air over critical operations, and glove ports provide manipulation without opening the chamber. Materials move through bio-decontamination hatches, rapid transfer ports or compatible sterile connections. The design focuses on sterile product protection and is not used as a negative-pressure hazardous-material barrier unless specifically engineered for that combined risk.

Key Features

Positive filtered pressure prevents untreated room air from entering through small leaks.

A full chamber diffuser delivers first air over open sterile product locations.

Glove access keeps operators physically separated from the aseptic zone.

Closed transfer interfaces protect supplies during ingress and finished items during egress.

Pressure-hold and glove-test connections support barrier integrity management.

Kunden Produktbedenken

Product protection depends on positive pressure, clean transfer and unobstructed first air remaining coordinated throughout operation.

Room air enters during material loading.Interlocked transfer chambers and rapid ports separate loading from the main chamber.

Equipment blocks first air over open sterile items.Diffuser sections and internal supports are arranged around the critical process locations.

A glove leak allows direct operator contact with the chamber.Replaceable glove rings and integrity-test ports support planned glove management.

A positive chamber is assumed to contain hazardous powders.The product-protection purpose and pressure direction are clearly distinguished from containment isolators.

Typische Anwendungen

Sterile component assemblyAseptic preparationOpen product protectionSmall-batch sterile manufacturing

Technische Parameter

Typical configurable construction ranges for a positive-pressure aseptic isolator are listed below.

Core Material	Welded SUS316L aseptic chamber with laminated safety glass and CSM or butyl glove assemblies
Panel Dicke	50-100 mm double-skin chamber and fan-filter sections
Effektive Breite	1200-5000 mm usable aseptic process width
Maximale Länge	Bis zu 8000 mm Gesamtlänge des Isolators
Stahl facing Dicke	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
Kerndichte	Approximately 8000 kg/m³ for SUS316L chamber material
Thermische Leitfähigkeit	14 - 16 W / (m · K) für austenitischen Edelstahl
Oberfläche Finish	Electropolished SUS316L with welded radiused corners and clear viewing panels
Gemeinsamer Typ	Pressure-tight welded chamber with sealed glove rings, gasketed transfer doors and clamped HEPA filter frames
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Integrated vapor bio-decontaminationRapid transfer portsEnvironmental monitoring portsSingle- or multi-chamber configuration

Planning a Positive-Pressure Aseptic Isolator specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team