Front-left three-quarter view of a slim aluminum automatic door drop seal with one dark silicone blade

Alat ganti peralatan bilik bersih

Meterai Drop Pintu Automatik

A slim mechanical door-bottom assembly that retracts its silicone blade while the door moves and lowers it evenly against the floor when a single end plunger meets the jamb.

Single-Side Plunger Actuation
Parallel-Drop Silicone Blade
Slim Aluminum Carrier
No Electrical Connection

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This automatic door drop seal is a narrow mortised assembly for the bottom edge of cleanroom swing doors. A jamb-contacting plunger transfers closing movement through a spring-loaded linkage inside the extruded aluminum carrier. The linkage lowers one continuous silicone blade after the door reaches the frame and returns it into the carrier as soon as the door opens. The self-levelling movement helps the blade follow modest floor variation without dragging across the walking surface during the swing cycle.

Ciri-ciri Utama

The one-sided adjustable plunger converts the final part of door travel into controlled downward seal movement without electrical power.

A spring-return pushrod and pivot linkage retract the blade promptly to reduce scraping, rolling resistance and premature elastomer wear.

The continuous dark silicone blade descends in a parallel action to close the under-door air path across the full leaf width.

The slim natural-aluminum carrier can be recessed into the door bottom and serviced from the actuator end without a floor-mounted track.

Kebimbangan Produk Pelanggan

Reliable under-door sealing requires enough blade travel for the finished gap, accurate plunger contact and free retraction before the door begins to swing.

A fixed sweep drags across resin or vinyl flooring, increasing door force and shedding worn seal material near a controlled area.The spring-return linkage lifts the silicone blade clear of the floor immediately after the plunger releases.

A floor that is slightly out of level can leave one end of a rigid door-bottom gasket open.The parallel-drop, self-levelling carrier allows the continuous blade to seat across the opening while maintaining a single uninterrupted seal line.

An over-extended actuator can force the mechanism beyond its useful travel and shorten component life.The accessible end plunger provides controlled stroke adjustment so the blade reaches the floor near the final closed position.

A bulky surface-mounted device can conflict with cleanroom door skins, kick plates or flush architectural details.The narrow extruded carrier fits a prepared mortise in the door bottom, leaving only the end actuator and descending seal function exposed.

Permohonan yang biasa

Cleanroom personnel swing doorsAirlock and gowning-room doorsLaboratory corridor doorsControlled production-suite entrances

Parameter teknikal

The following ranges describe common slim mortised automatic drop seals with an aluminum carrier, single-end mechanical actuator and continuous silicone sealing blade.

Bahan Teras	EN AW-6063 extruded aluminum carrier with stainless-steel spring linkage and dark silicone sealing blade
Ketebalan Panel	14-20 mm nominal carrier width
Lebar berkesan	30-40 mm nominal carrier height
Panjang maksimum	Up to 1235 mm standard assembly length; longer versions available by selection
Keluli Menghadapi Ketebalan	0.8-1.5 mm nominal stainless end-plate and linkage thickness
Ketumpatan teras	Approximately 2700 kg/m³ for the aluminum carrier
Kekonduksian Terma	Approximately 190-201 W/(m·K) for representative 6063 aluminum
Kemasan permukaan	Mill-finish natural-silver aluminum with silver end plates and dark-gray silicone blade
Jenis Bersatu	Single-end plunger-actuated spring linkage with parallel-drop self-levelling seal carrier
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Length matched to the prepared door leafGray or black silicone sealing bladeLeft- or right-hand actuator orientationMortised or face-mounted carrier configuration

Planning a Automatic Door Drop Seal specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami