Front-left three-quarter view of a slim aluminum automatic door drop seal with one dark silicone blade

클린룸 장비 예비 부품

자동 도어 드롭 씰

A slim mechanical door-bottom assembly that retracts its silicone blade while the door moves and lowers it evenly against the floor when a single end plunger meets the jamb.

Single-Side Plunger Actuation
Parallel-Drop Silicone Blade
Slim Aluminum Carrier
No Electrical Connection

견적 요청 제품 찾아보기

상품 소개

This automatic door drop seal is a narrow mortised assembly for the bottom edge of cleanroom swing doors. A jamb-contacting plunger transfers closing movement through a spring-loaded linkage inside the extruded aluminum carrier. The linkage lowers one continuous silicone blade after the door reaches the frame and returns it into the carrier as soon as the door opens. The self-levelling movement helps the blade follow modest floor variation without dragging across the walking surface during the swing cycle.

주요 기능

The one-sided adjustable plunger converts the final part of door travel into controlled downward seal movement without electrical power.

A spring-return pushrod and pivot linkage retract the blade promptly to reduce scraping, rolling resistance and premature elastomer wear.

The continuous dark silicone blade descends in a parallel action to close the under-door air path across the full leaf width.

The slim natural-aluminum carrier can be recessed into the door bottom and serviced from the actuator end without a floor-mounted track.

고객 제품 관심사

Reliable under-door sealing requires enough blade travel for the finished gap, accurate plunger contact and free retraction before the door begins to swing.

A fixed sweep drags across resin or vinyl flooring, increasing door force and shedding worn seal material near a controlled area.The spring-return linkage lifts the silicone blade clear of the floor immediately after the plunger releases.

A floor that is slightly out of level can leave one end of a rigid door-bottom gasket open.The parallel-drop, self-levelling carrier allows the continuous blade to seat across the opening while maintaining a single uninterrupted seal line.

An over-extended actuator can force the mechanism beyond its useful travel and shorten component life.The accessible end plunger provides controlled stroke adjustment so the blade reaches the floor near the final closed position.

A bulky surface-mounted device can conflict with cleanroom door skins, kick plates or flush architectural details.The narrow extruded carrier fits a prepared mortise in the door bottom, leaving only the end actuator and descending seal function exposed.

일반적인 응용 프로그램

Cleanroom personnel swing doorsAirlock and gowning-room doorsLaboratory corridor doorsControlled production-suite entrances

기술 매개변수

The following ranges describe common slim mortised automatic drop seals with an aluminum carrier, single-end mechanical actuator and continuous silicone sealing blade.

핵심 재료	EN AW-6063 extruded aluminum carrier with stainless-steel spring linkage and dark silicone sealing blade
패널 두께	14-20 mm nominal carrier width
유효 폭	30-40 mm nominal carrier height
최대 길이	Up to 1235 mm standard assembly length; longer versions available by selection
강철 면면 두께	0.8-1.5 mm nominal stainless end-plate and linkage thickness
코어 밀도	Approximately 2700 kg/m³ for the aluminum carrier
열전도도 (Thermal Conductivity)	Approximately 190-201 W/(m·K) for representative 6063 aluminum
표면 마무리	Mill-finish natural-silver aluminum with silver end plates and dark-gray silicone blade
접합 유형	Single-end plunger-actuated spring linkage with parallel-drop self-levelling seal carrier
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Length matched to the prepared door leafGray or black silicone sealing bladeLeft- or right-hand actuator orientationMortised or face-mounted carrier configuration

Planning a Automatic Door Drop Seal specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.