Front-left three-quarter view of a slim aluminum automatic door drop seal with one dark silicone blade

クリーンルーム機器のスペアパーツ

自動ドアの落下シール

A slim mechanical door-bottom assembly that retracts its silicone blade while the door moves and lowers it evenly against the floor when a single end plunger meets the jamb.

Single-Side Plunger Actuation
Parallel-Drop Silicone Blade
Slim Aluminum Carrier
No Electrical Connection

見積もりリクエスト製品案内

商品紹介

This automatic door drop seal is a narrow mortised assembly for the bottom edge of cleanroom swing doors. A jamb-contacting plunger transfers closing movement through a spring-loaded linkage inside the extruded aluminum carrier. The linkage lowers one continuous silicone blade after the door reaches the frame and returns it into the carrier as soon as the door opens. The self-levelling movement helps the blade follow modest floor variation without dragging across the walking surface during the swing cycle.

主要な特徴

The one-sided adjustable plunger converts the final part of door travel into controlled downward seal movement without electrical power.

A spring-return pushrod and pivot linkage retract the blade promptly to reduce scraping, rolling resistance and premature elastomer wear.

The continuous dark silicone blade descends in a parallel action to close the under-door air path across the full leaf width.

The slim natural-aluminum carrier can be recessed into the door bottom and serviced from the actuator end without a floor-mounted track.

お客様の製品に関する懸念事項

Reliable under-door sealing requires enough blade travel for the finished gap, accurate plunger contact and free retraction before the door begins to swing.

A fixed sweep drags across resin or vinyl flooring, increasing door force and shedding worn seal material near a controlled area.The spring-return linkage lifts the silicone blade clear of the floor immediately after the plunger releases.

A floor that is slightly out of level can leave one end of a rigid door-bottom gasket open.The parallel-drop, self-levelling carrier allows the continuous blade to seat across the opening while maintaining a single uninterrupted seal line.

An over-extended actuator can force the mechanism beyond its useful travel and shorten component life.The accessible end plunger provides controlled stroke adjustment so the blade reaches the floor near the final closed position.

A bulky surface-mounted device can conflict with cleanroom door skins, kick plates or flush architectural details.The narrow extruded carrier fits a prepared mortise in the door bottom, leaving only the end actuator and descending seal function exposed.

典型的な用途

Cleanroom personnel swing doorsAirlock and gowning-room doorsLaboratory corridor doorsControlled production-suite entrances

技術的なパラメータ

The following ranges describe common slim mortised automatic drop seals with an aluminum carrier, single-end mechanical actuator and continuous silicone sealing blade.

コア材料	EN AW-6063 extruded aluminum carrier with stainless-steel spring linkage and dark silicone sealing blade
パネルの厚さ	14-20 mm nominal carrier width
有効幅	30-40 mm nominal carrier height
最大長さ	Up to 1235 mm standard assembly length; longer versions available by selection
鋼鉄の厚さを直面する	0.8-1.5 mm nominal stainless end-plate and linkage thickness
コア密度	Approximately 2700 kg/m³ for the aluminum carrier
熱伝導率	Approximately 190-201 W/(m·K) for representative 6063 aluminum
表面仕上げ	Mill-finish natural-silver aluminum with silver end plates and dark-gray silicone blade
ジョイントタイプ	Single-end plunger-actuated spring linkage with parallel-drop self-levelling seal carrier
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Length matched to the prepared door leafGray or black silicone sealing bladeLeft- or right-hand actuator orientationMortised or face-mounted carrier configuration

自動ドアドロップシールの仕様を計画していますか？

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する