Pneumatic anti-vibration table with full black granite work surface

Perabot bilik bersih dan produk keluli tahan karat

Jadual Anti Getaran

A full-surface granite instrument table supported on pneumatic isolation modules and a rigid stainless frame for vibration-sensitive measurement and imaging.

Full black granite work surface
Four pneumatic isolation modules
Rigid welded stainless base
Independent fine leveling

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The anti-vibration table supports microscopes, optical measuring systems and other sensitive instruments on one continuous high-mass granite slab. Four pneumatic isolators separate the stone from the welded stainless base while maintaining a stable working height. A compact manifold equalizes the air modules, and mechanical stops limit lateral movement during loading. The open round-tube frame remains accessible for cleaning and allows the table to be positioned around instrument cables without enclosed cavities.

Ciri-ciri Utama

A continuous high-mass granite slab provides one stable reference plane for the complete instrument footprint.

Pneumatic isolation modules decouple short floor disturbances from the stone without placing compliant pads directly under the instrument.

A welded stainless base resists frame racking while keeping horizontal surfaces and dirt traps to a minimum.

Separate frame levelers establish the table position before the pneumatic modules are charged and balanced.

Kebimbangan Produk Pelanggan

High-magnification and small-displacement measurements become unstable when floor motion or frame deflection reaches the instrument.

Several instrument components sit on different small isolation pads and move relative to one another.One continuous granite surface keeps the complete optical or measurement setup on the same isolated plane.

Footsteps and nearby equipment introduce short vibration bursts into a rigid bench.Four pneumatic modules interrupt the direct transmission path between floor, frame and stone.

A flexible base twists when a heavy instrument is positioned off centre.The welded round-tube base and distributed isolator layout support asymmetric instrument footprints without a cabinet body.

Isolation performance deteriorates when the table itself is not level.Threaded frame feet provide coarse leveling before the air modules are balanced.

Permohonan yang biasa

Optical microscopySurface profilometryPrecision dimensional inspectionMicroelectronics probingSensitive laboratory instrumentation

Parameter teknikal

Typical configurable specifications for a pneumatic anti-vibration table are listed below.

Bahan Teras	Full-surface dense black granite slab on pneumatic isolators and a Type 304 stainless steel frame
Ketebalan Panel	80–100 mm granite work surface
Lebar berkesan	750–900 mm work surface depth
Panjang maksimum	1800 mm
Keluli Menghadapi Ketebalan	1.5–2.0 mm Type 304 stainless frame shrouds and service panels
Ketumpatan teras	2600–2800 kg/m³ for black granite
Kekonduksian Terma	2.5–3.5 W/(m·K) for granite
Kemasan permukaan	Fine-polished black granite with brushed stainless steel frame
Jenis Bersatu	Four-point pneumatic isolation between the granite slab and welded stainless support frame
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Passive elastomer or pneumatic isolation modulesManual or automatic leveling manifoldRear cable-management railCustom granite cut-outs for instrument services

Planning a Anti-Vibration Table specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami