Pneumatic anti-vibration table with full black granite work surface

クリーンルーム家具 · ステンレス製品

振動防止テーブル

A full-surface granite instrument table supported on pneumatic isolation modules and a rigid stainless frame for vibration-sensitive measurement and imaging.

Full black granite work surface
Four pneumatic isolation modules
Rigid welded stainless base
Independent fine leveling

見積もりリクエスト製品案内

商品紹介

The anti-vibration table supports microscopes, optical measuring systems and other sensitive instruments on one continuous high-mass granite slab. Four pneumatic isolators separate the stone from the welded stainless base while maintaining a stable working height. A compact manifold equalizes the air modules, and mechanical stops limit lateral movement during loading. The open round-tube frame remains accessible for cleaning and allows the table to be positioned around instrument cables without enclosed cavities.

主要な特徴

A continuous high-mass granite slab provides one stable reference plane for the complete instrument footprint.

Pneumatic isolation modules decouple short floor disturbances from the stone without placing compliant pads directly under the instrument.

A welded stainless base resists frame racking while keeping horizontal surfaces and dirt traps to a minimum.

Separate frame levelers establish the table position before the pneumatic modules are charged and balanced.

お客様の製品に関する懸念事項

High-magnification and small-displacement measurements become unstable when floor motion or frame deflection reaches the instrument.

Several instrument components sit on different small isolation pads and move relative to one another.One continuous granite surface keeps the complete optical or measurement setup on the same isolated plane.

Footsteps and nearby equipment introduce short vibration bursts into a rigid bench.Four pneumatic modules interrupt the direct transmission path between floor, frame and stone.

A flexible base twists when a heavy instrument is positioned off centre.The welded round-tube base and distributed isolator layout support asymmetric instrument footprints without a cabinet body.

Isolation performance deteriorates when the table itself is not level.Threaded frame feet provide coarse leveling before the air modules are balanced.

典型的な用途

Optical microscopySurface profilometryPrecision dimensional inspectionMicroelectronics probingSensitive laboratory instrumentation

技術的なパラメータ

Typical configurable specifications for a pneumatic anti-vibration table are listed below.

コア材料	Full-surface dense black granite slab on pneumatic isolators and a Type 304 stainless steel frame
パネルの厚さ	80–100 mm granite work surface
有効幅	750–900 mm work surface depth
最大長さ	1800 mm
鋼鉄の厚さを直面する	1.5–2.0 mm Type 304 stainless frame shrouds and service panels
コア密度	2600–2800 kg/m³ for black granite
熱伝導率	2.5–3.5 W/(m·K) for granite
表面仕上げ	Fine-polished black granite with brushed stainless steel frame
ジョイントタイプ	Four-point pneumatic isolation between the granite slab and welded stainless support frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Passive elastomer or pneumatic isolation modulesManual or automatic leveling manifoldRear cable-management railCustom granite cut-outs for instrument services

Planning a Anti-Vibration Table specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する