Pneumatic anti-vibration table with full black granite work surface

클린룸 가구 및 스테인레스 스틸 제품

진동 방지 테이블

A full-surface granite instrument table supported on pneumatic isolation modules and a rigid stainless frame for vibration-sensitive measurement and imaging.

Full black granite work surface
Four pneumatic isolation modules
Rigid welded stainless base
Independent fine leveling

견적 요청 제품 찾아보기

상품 소개

The anti-vibration table supports microscopes, optical measuring systems and other sensitive instruments on one continuous high-mass granite slab. Four pneumatic isolators separate the stone from the welded stainless base while maintaining a stable working height. A compact manifold equalizes the air modules, and mechanical stops limit lateral movement during loading. The open round-tube frame remains accessible for cleaning and allows the table to be positioned around instrument cables without enclosed cavities.

주요 기능

A continuous high-mass granite slab provides one stable reference plane for the complete instrument footprint.

Pneumatic isolation modules decouple short floor disturbances from the stone without placing compliant pads directly under the instrument.

A welded stainless base resists frame racking while keeping horizontal surfaces and dirt traps to a minimum.

Separate frame levelers establish the table position before the pneumatic modules are charged and balanced.

고객 제품 관심사

High-magnification and small-displacement measurements become unstable when floor motion or frame deflection reaches the instrument.

Several instrument components sit on different small isolation pads and move relative to one another.One continuous granite surface keeps the complete optical or measurement setup on the same isolated plane.

Footsteps and nearby equipment introduce short vibration bursts into a rigid bench.Four pneumatic modules interrupt the direct transmission path between floor, frame and stone.

A flexible base twists when a heavy instrument is positioned off centre.The welded round-tube base and distributed isolator layout support asymmetric instrument footprints without a cabinet body.

Isolation performance deteriorates when the table itself is not level.Threaded frame feet provide coarse leveling before the air modules are balanced.

일반적인 응용 프로그램

Optical microscopySurface profilometryPrecision dimensional inspectionMicroelectronics probingSensitive laboratory instrumentation

기술 매개변수

Typical configurable specifications for a pneumatic anti-vibration table are listed below.

핵심 재료	Full-surface dense black granite slab on pneumatic isolators and a Type 304 stainless steel frame
패널 두께	80–100 mm granite work surface
유효 폭	750–900 mm work surface depth
최대 길이	1800 mm
강철 면면 두께	1.5–2.0 mm Type 304 stainless frame shrouds and service panels
코어 밀도	2600–2800 kg/m³ for black granite
열전도도 (Thermal Conductivity)	2.5–3.5 W/(m·K) for granite
표면 마무리	Fine-polished black granite with brushed stainless steel frame
접합 유형	Four-point pneumatic isolation between the granite slab and welded stainless support frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Passive elastomer or pneumatic isolation modulesManual or automatic leveling manifoldRear cable-management railCustom granite cut-outs for instrument services

Planning a Anti-Vibration Table specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.