Ultrasonic DI water fogger in three-quarter mobile cabinet view

クリーンルーム試験 · 検証機器

超音波 DI 水霧機

A mobile ultrasonic fogger that atomizes DI, ultrapure or WFI water into a clean visible mist for repeatable airflow mapping in controlled environments.

Clean high-purity water tracer.
Adjustable ultrasonic fog delivery.
Drainable stainless mobile system.

見積もりリクエスト製品案内

商品紹介

The system combines a stainless water reservoir, submerged ultrasonic transducers and a regulated carrier-air path to generate dense water-only fog without combustion or oil residue. Separate output and delivery controls help technicians match fog volume and exit velocity to the airflow under observation. A flexible sanitary hose carries mist from the mobile base to interchangeable study outlets.

主要な特徴

DI, ultrapure or WFI water provides a clean tracer medium.

Ultrasonic atomization produces a dense visible mist without heating fuel.

Independent fog-volume and carrier-air adjustment supports delicate flow studies.

Stainless water-contact surfaces facilitate draining and routine cleaning.

Flexible hose separates the generator from the actual observation point.

Mobile enclosure protects the reservoir and controls during facility work.

お客様の製品に関する懸念事項

A dependable airflow study requires visible, repeatable fog that can follow low-velocity cleanroom patterns without introducing oily residue or an uncontrolled high-energy jet.

Tracer residue can complicate cleaning after a visualization study.The ultrasonic system atomizes suitable high-purity water without oil-based smoke fluid.

Excessive discharge velocity can distort low-speed cleanroom airflow.Separate fog-density and carrier-air controls allow a gentler delivery setting.

A water system can retain moisture between study sessions.Accessible stainless water-contact surfaces and a dedicated drain support controlled emptying and drying.

The generator cannot always stand beside the camera view.A flexible delivery hose positions only the compact outlet within the test area.

典型的な用途

Pharmaceutical cleanroom smoke studiesUnidirectional airflow mappingHEPA supply-pattern visualizationIsolator and filling-line airflow studiesContainment and migration-path observation

技術的なパラメータ

Typical ultrasonic DI-water fogger construction is outlined below; transducer capacity, reservoir volume and delivery accessories can be configured for the study area.

コア材料	Ultrasonic transducer bank, 316L stainless water reservoir, polymer delivery hose and regulated blower
パネルの厚さ	Typically 1.0-1.5 mm for enclosure and reservoir panels
有効幅	Approximately 300-500 mm across the mobile cabinet
最大長さ	Approximately 450-700 mm for cabinet; delivery hose typically 2000-5000 mm
鋼鉄の厚さを直面する	Typically 1.0-1.5 mm for stainless cabinet and water-contact reservoir
コア密度	Approximately 7950-8000 kg/m³ for 316L stainless steel
熱伝導率	316L ステンレス鋼の場合、約 14 — 16 W / （ m · K ）
表面仕上げ	Brushed or electropolished stainless body with dark control panel, clear level indicator and white hose
ジョイントタイプ	Sealed reservoir lid, drain fitting and quick-connect sanitary fog outlet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Multiple transducer capacitiesStraight or perforated fog outletExtended sanitary delivery hoseリモートコントロールFog illumination moduleTransport and storage cover

Planning a Ultrasonic DI Water Fogger specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する