Ultrasonic DI water fogger in three-quarter mobile cabinet view

클린룸 테스트 및 검증 장비

초음파 DI 물 Fogger

A mobile ultrasonic fogger that atomizes DI, ultrapure or WFI water into a clean visible mist for repeatable airflow mapping in controlled environments.

Clean high-purity water tracer.
Adjustable ultrasonic fog delivery.
Drainable stainless mobile system.

견적 요청 제품 찾아보기

상품 소개

The system combines a stainless water reservoir, submerged ultrasonic transducers and a regulated carrier-air path to generate dense water-only fog without combustion or oil residue. Separate output and delivery controls help technicians match fog volume and exit velocity to the airflow under observation. A flexible sanitary hose carries mist from the mobile base to interchangeable study outlets.

주요 기능

DI, ultrapure or WFI water provides a clean tracer medium.

Ultrasonic atomization produces a dense visible mist without heating fuel.

Independent fog-volume and carrier-air adjustment supports delicate flow studies.

Stainless water-contact surfaces facilitate draining and routine cleaning.

Flexible hose separates the generator from the actual observation point.

Mobile enclosure protects the reservoir and controls during facility work.

고객 제품 관심사

A dependable airflow study requires visible, repeatable fog that can follow low-velocity cleanroom patterns without introducing oily residue or an uncontrolled high-energy jet.

Tracer residue can complicate cleaning after a visualization study.The ultrasonic system atomizes suitable high-purity water without oil-based smoke fluid.

Excessive discharge velocity can distort low-speed cleanroom airflow.Separate fog-density and carrier-air controls allow a gentler delivery setting.

A water system can retain moisture between study sessions.Accessible stainless water-contact surfaces and a dedicated drain support controlled emptying and drying.

The generator cannot always stand beside the camera view.A flexible delivery hose positions only the compact outlet within the test area.

일반적인 응용 프로그램

Pharmaceutical cleanroom smoke studiesUnidirectional airflow mappingHEPA supply-pattern visualizationIsolator and filling-line airflow studiesContainment and migration-path observation

기술 매개변수

Typical ultrasonic DI-water fogger construction is outlined below; transducer capacity, reservoir volume and delivery accessories can be configured for the study area.

핵심 재료	Ultrasonic transducer bank, 316L stainless water reservoir, polymer delivery hose and regulated blower
패널 두께	Typically 1.0-1.5 mm for enclosure and reservoir panels
유효 폭	Approximately 300-500 mm across the mobile cabinet
최대 길이	Approximately 450-700 mm for cabinet; delivery hose typically 2000-5000 mm
강철 면면 두께	Typically 1.0-1.5 mm for stainless cabinet and water-contact reservoir
코어 밀도	Approximately 7950-8000 kg/m³ for 316L stainless steel
열전도도 (Thermal Conductivity)	316 L 스테인레스 스틸의 약 14 - 16 W / (m · K)
표면 마무리	Brushed or electropolished stainless body with dark control panel, clear level indicator and white hose
접합 유형	Sealed reservoir lid, drain fitting and quick-connect sanitary fog outlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Multiple transducer capacitiesStraight or perforated fog outletExtended sanitary delivery hose원격 제어Fog illumination moduleTransport and storage cover

Planning a Ultrasonic DI Water Fogger specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.