Complete stainless surface microbial sampler with weighted base, blue grip and digital timer

微生物環境モニタリング製品

表面微生物サンプラー

A sterilizable weighted contact-plate applicator that applies repeatable pressure and timed dwell to flat cleanroom surfaces.

Repeatable Contact Pressure
Timed Surface Application
55 mm Plate Compatibility
Sterilizable Stainless Construction

見積もりリクエスト製品案内

商品紹介

The Surface Microbial Sampler is a precision contact weight used with raised-agar contact plates. Its balanced stainless body seats over a standard plate holder and transfers a controlled vertical load to the agar while a small timer defines the dwell period. A spring-guided plunger helps the operator maintain even contact without rocking the plate or concentrating force at one edge. After sampling, the plate is removed and capped for incubation, leaving the applicator available for cleaning or steam sterilization.

主要な特徴

A defined weighted load reduces operator-to-operator variation in plate pressure.

The plate-retaining collar centers the contact dish beneath the applicator.

A pull-out timer standardizes the selected contact duration at each location.

Smooth stainless components tolerate repeated cleaning and sterilization.

お客様の製品に関する懸念事項

Surface recovery varies when operators use different pressure, dwell time or plate angle on the same material.

Hand pressure differs between technicians and sampling rounds.A fixed applicator mass supplies the same nominal load without relying on operator force.

Tilting the plate traps air or contacts only part of the agar dome.A centered collar and guided vertical motion support even face-to-surface contact.

Short or inconsistent dwell time reduces comparability.The integrated timer gives a visible repeatable contact interval.

Complex joints retain disinfectant or surface residue.Removable smooth stainless parts simplify wiping and validated sterilization.

典型的な用途

Cleanroom workbench surfacesIsolator and RABS interiorsWalls, floors and equipment panelsCleaning-process verification

技術的なパラメータ

Typical construction values for a reusable contact-plate surface sampler are listed below.

コア材料	304 or 316 stainless weighted body with silicone grip and sealed electronic timer
パネルの厚さ	55-90 mm weighted body height
有効幅	55-70 mm contact-plate seat diameter
最大長さ	Up to 180 mm overall height with plunger extended
鋼鉄の厚さを直面する	1.5-3.0 mm stainless outer shell and plate collar
コア密度	7900-8000 kg/m³ for stainless weighted components
熱伝導率	14-17 W/(m·K) for stainless steel components
表面仕上げ	Electropolished or fine satin stainless steel with blue silicone grip ring
ジョイントタイプ	Removable 55 mm plate-retaining collar with spring-guided plunger and pull-out timer
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

55 mm contact-plate collarAlternative application weightsDigital dwell timerAutoclavable timer-free configuration

Planning a Surface Microbial Sampler specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する