Complete stainless surface microbial sampler with weighted base, blue grip and digital timer

미생물 환경 모니터링 제품

표면 미생물 샘플러 Surface Microbial Sampler

A sterilizable weighted contact-plate applicator that applies repeatable pressure and timed dwell to flat cleanroom surfaces.

Repeatable Contact Pressure
Timed Surface Application
55 mm Plate Compatibility
Sterilizable Stainless Construction

견적 요청 제품 찾아보기

상품 소개

The Surface Microbial Sampler is a precision contact weight used with raised-agar contact plates. Its balanced stainless body seats over a standard plate holder and transfers a controlled vertical load to the agar while a small timer defines the dwell period. A spring-guided plunger helps the operator maintain even contact without rocking the plate or concentrating force at one edge. After sampling, the plate is removed and capped for incubation, leaving the applicator available for cleaning or steam sterilization.

주요 기능

A defined weighted load reduces operator-to-operator variation in plate pressure.

The plate-retaining collar centers the contact dish beneath the applicator.

A pull-out timer standardizes the selected contact duration at each location.

Smooth stainless components tolerate repeated cleaning and sterilization.

고객 제품 관심사

Surface recovery varies when operators use different pressure, dwell time or plate angle on the same material.

Hand pressure differs between technicians and sampling rounds.A fixed applicator mass supplies the same nominal load without relying on operator force.

Tilting the plate traps air or contacts only part of the agar dome.A centered collar and guided vertical motion support even face-to-surface contact.

Short or inconsistent dwell time reduces comparability.The integrated timer gives a visible repeatable contact interval.

Complex joints retain disinfectant or surface residue.Removable smooth stainless parts simplify wiping and validated sterilization.

일반적인 응용 프로그램

Cleanroom workbench surfacesIsolator and RABS interiorsWalls, floors and equipment panelsCleaning-process verification

기술 매개변수

Typical construction values for a reusable contact-plate surface sampler are listed below.

핵심 재료	304 or 316 stainless weighted body with silicone grip and sealed electronic timer
패널 두께	55-90 mm weighted body height
유효 폭	55-70 mm contact-plate seat diameter
최대 길이	Up to 180 mm overall height with plunger extended
강철 면면 두께	1.5-3.0 mm stainless outer shell and plate collar
코어 밀도	7900-8000 kg/m³ for stainless weighted components
열전도도 (Thermal Conductivity)	14-17 W/(m·K) for stainless steel components
표면 마무리	Electropolished or fine satin stainless steel with blue silicone grip ring
접합 유형	Removable 55 mm plate-retaining collar with spring-guided plunger and pull-out timer
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

55 mm contact-plate collarAlternative application weightsDigital dwell timerAutoclavable timer-free configuration

Planning a Surface Microbial Sampler specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.