Operating room laminar flow ceiling complete underside three-quarter view with six HEPA diffusers and twin LED strips

業界特有のクリーンルーム機器

手術室の層流の天井

A rectangular surgical ceiling canopy that distributes conditioned air through six terminal HEPA modules and perforated diffusers over the operating zone.

Six-Module HEPA Array
Unidirectional Downflow Face
Room-Side Filter Service
Integrated Linear Lighting

見積もりリクエスト製品案内

商品紹介

The operating room laminar flow ceiling combines a shallow sealed supply plenum, six terminal HEPA modules and a planar perforated diffuser face in one suspended canopy. Conditioned air enters through the centered top collar, equalizes inside the pressure chamber and passes vertically through the filter array. Powder-coated steel casing, anodized aluminum filter rails, gasketed room-side retainers and two recessed light strips form a coordinated ceiling terminal with accessible service points and cleanable exposed surfaces.

主要な特徴

Six separately retained HEPA modules create a broad filtered-air face without relying on one oversized disposable element.

Perforated diffuser panels add resistance after the filters to reduce local jets and improve distribution across the canopy face.

Room-side latches and continuous gaskets allow individual filter access while maintaining a defined sealing interface.

Two recessed linear luminaires sit outside the active filter grid so task lighting does not divide the central airflow area.

お客様の製品に関する懸念事項

A surgical canopy must deliver a broad, stable filtered-air zone while preserving service access and coordinating ceiling-mounted lighting and ventilation interfaces.

Uneven plenum pressure can produce fast local jets and weak areas across the operating zone.A common pressure chamber and matched perforated diffuser faces distribute supply air across all six terminal modules.

Replacing a terminal filter from above can disrupt ceiling services and extend maintenance access time.Room-side locking frames release one gasketed module at a time without dismantling the complete canopy.

Leak paths around filter frames can bypass the intended terminal filtration route.Continuous compression gaskets, rigid aluminum rails and quarter-turn retainers form a controlled perimeter seal.

Separate light fittings can interrupt the filtered ceiling face or create difficult ceiling junctions.Twin recessed linear lights are integrated along the outer rails while the six-module central grid remains continuous.

典型的な用途

Orthopedic and implant operating theatresGeneral surgical operating roomsHybrid and image-guided procedure suitesSterile instrument preparation areas

技術的なパラメータ

Typical configurable construction values for a rectangular operating-room laminar airflow ceiling are listed below.

コア材料	Epoxy powder-coated galvanized steel plenum with anodized EN AW-6063 aluminum frames, H14 HEPA modules and perforated diffusers
パネルの厚さ	400-450 mm overall plenum depth
有効幅	1880-2480 mm nominal diffuser width
最大長さ	Up to 3080 mm standard canopy length
鋼鉄の厚さを直面する	1.0-1.2 mm powder-coated galvanized or optional stainless plenum sheet
コア密度	2700 kg/m³ for anodized EN AW-6063 aluminum frame components
熱伝導率	200-220 W/(m·K) for EN AW-6063 aluminum framing at room temperature
表面仕上げ	RAL 9010 epoxy powder-coated housing with satin anodized aluminum rails and white perforated diffuser faces
ジョイントタイプ	Gasketed room-side filter locking frames within a modular perimeter, sealed top plenum and flanged rectangular inlet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Standard and custom rectangular canopy dimensionsPowder-coated galvanized or stainless steel plenum constructionFour-, six- or eight-module terminal filter arrangementsIntegrated linear lighting or sealed surgical-light passage

Planning a Operating Room Laminar Flow Ceiling specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する