Humidity calibrator in three-quarter view showing circular test chamber, touchscreen and six probe ports

クリーンルーム試験 · 検証機器

湿度キャリブレーター

A transportable humidity and temperature calibration chamber for creating stable setpoints around multiple probes, transmitters and reference sensors.

Stable mixed-flow humidity setpoints.
Six-probe sealed test chamber.
Programmable touch control.

見積もりリクエスト製品案内

商品紹介

This bench-top calibrator combines a sealed stainless working chamber with mixed-flow humidity generation, thermoelectric temperature control and an integrated reference channel. Dry and humidified air streams are circulated through the chamber to establish repeatable test conditions without an external compressed-air supply. A front touchscreen manages setpoints, stabilization status and programmed sequences, while interchangeable door sleeves accommodate different probe diameters and keep each insertion point sealed.

主要な特徴

Dynamic mixed-flow generation supports multiple relative-humidity setpoints in one session.

Thermoelectric chamber control limits temperature-driven errors during humidity comparison.

Six sealed probe ports allow several instruments to share the same controlled condition.

Integrated reference input displays chamber conditions beside the programmed setpoint.

On-screen sequence control reduces repetitive manual changes during multi-point calibration.

Transportable bench enclosure supports laboratory use and on-site instrument checks.

お客様の製品に関する懸念事項

Reliable humidity calibration depends on placing the instrument under test and the reference in the same stable temperature and water-vapor environment while preventing ambient leakage around the probes.

Single-point checks can miss nonlinear sensor error across the working humidity range.Programmable sequences expose every connected instrument to several controlled relative-humidity setpoints.

Temperature mismatch between a probe and its reference can distort relative-humidity results.A circulated thermoelectric chamber holds the devices under test and reference sensor at one controlled temperature.

Calibrating probes one by one consumes technician time and creates inconsistent conditions.Six sealed door ports support simultaneous comparison of several probes in the same working volume.

Different probe diameters can leak ambient air into the chamber.Interchangeable sleeves and blanking plugs seal each occupied or unused port around the actual probe body.

典型的な用途

Cleanroom humidity probe calibrationEnvironmental transmitter verificationWarehouse and stability-room sensor checksHVAC humidity instrument maintenanceLaboratory reference-hygrometer comparison

技術的なパラメータ

Representative transportable humidity-calibrator construction is listed below; chamber door, probe sleeves, reference interface and operating range can be configured for the calibration workload.

コア材料	Powder-coated aluminum enclosure, 304 stainless steel chamber, clear polycarbonate door insert and measurement electronics
パネルの厚さ	Typically 1.5-2.0 mm for aluminum enclosure panels
有効幅	Approximately 450 mm across the bench-top enclosure
最大長さ	Approximately 406 mm from front chamber door to rear enclosure panel
鋼鉄の厚さを直面する	Typically 1.0-1.5 mm for the stainless chamber liner and port plate
コア密度	Approximately 2700 kg/m³ for the aluminum enclosure
熱伝導率	Approximately 167-205 W/(m·K) for the aluminum enclosure
表面仕上げ	Neutral light-gray powder coat with a dark graphite control bezel, satin stainless chamber ring and black elastomer probe sleeves
ジョイントタイプ	Gasketed circular chamber door with six interchangeable probe sleeves, heated sample-loop fittings, USB and Ethernet interfaces
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Six-port probe doorCustom probe-diameter sleevesExternal chilled-mirror reference connectionExtended humidity rangeExtended temperature rangeAutomated multi-point calibration software

Planning a Humidity Calibrator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する