Complete flush cleanroom wall access panel

クリーンルームの壁と天井システム

クリーンルーム壁アクセスパネル

A flush metal wall hatch with a continuous gasket and concealed hardware, providing repeatable maintenance access to valves, controls and services behind cleanroom partitions.

Flush Wall Integration
Gasketed Perimeter
Concealed Door Hardware
Reusable Maintenance Access

見積もりリクエスト製品案内

商品紹介

Cleanroom Wall Access Panels are built into modular wall systems wherever valves, dampers, electrical controls or inspection points must remain reachable from the clean side. The framed opening supports a flush metal leaf that closes on a continuous gasket, reducing leakage and eliminating a projecting door edge. Concealed hinges, push catches and budget or security locks provide different access levels without cluttering the visible face. The door can match white wall coatings or use stainless steel in areas exposed to stronger disinfectants and frequent handling.

主要な特徴

The flush leaf aligns with the surrounding wall and avoids a protruding frame in traffic areas.

A continuous gasket closes the clearance gap between the access door and its rigid frame.

Concealed hinges protect hardware from contamination and accidental impact.

Optional locking controls entry to utilities without adding a separate surface-mounted cabinet.

Replaceable doors allow local repair while the surrounding cleanroom wall remains undisturbed.

お客様の製品に関する懸念事項

Wall service access must remain secure and easy to clean while preserving the flat surface and air seal of the surrounding partition.

Removing a complete wall panel for minor valve service disrupts the controlled room.A dedicated access leaf exposes only the required service zone and closes again on its original gasket.

Surface-mounted cabinets obstruct corridors and collect dust on horizontal edges.A recessed frame keeps the hatch flush with the cleanroom wall face.

Repeated opening can produce an uneven gap around a light-duty door.A reinforced frame and adjustable concealed hinges maintain alignment and gasket compression.

Unrestricted latches allow unauthorized entry to critical controls.A concealed key or budget lock limits access while keeping the external surface uncluttered.

典型的な用途

Wall-mounted valve accessElectrical control inspection pointsLow return-air damper serviceLaboratory utility maintenanceClean corridor MEP access

技術的なパラメータ

Common flush cleanroom wall access-panel ranges are listed below.

コア材料	Galvanized-steel door tray and reinforced steel perimeter frame
パネルの厚さ	Approximately 86 mm frame depth; reduced-depth frames available
有効幅	200–600 mm clear single-leaf width
最大長さ	1200 mm leaf height
鋼鉄の厚さを直面する	0.9 mm door tray and 1.2 mm frame
コア密度	N/A — hollow reinforced metal access door
熱伝導率	N/A — uninsulated maintenance hatch
表面仕上げ	Powder-coated galvanized steel, antibacterial coating or brushed stainless steel
ジョイントタイプ	Flush gasketed door with concealed hinges and push catch or hidden lock
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Single, double or multi-door layoutPush catch, budget lock or security lockAntibacterial powder coatPlastic-coated or stainless steel face

Planning a Cleanroom Wall Access Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する