Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom mur et systèmes de plafond
Panel d'accès mural salle blanche
A flush metal wall hatch with a continuous gasket and concealed hardware, providing repeatable maintenance access to valves, controls and services behind cleanroom partitions.
- Flush Wall Integration
- Gasketed Perimeter
- Concealed Door Hardware
- Reusable Maintenance Access
Introduction de produit
Cleanroom Wall Access Panels are built into modular wall systems wherever valves, dampers, electrical controls or inspection points must remain reachable from the clean side. The framed opening supports a flush metal leaf that closes on a continuous gasket, reducing leakage and eliminating a projecting door edge. Concealed hinges, push catches and budget or security locks provide different access levels without cluttering the visible face. The door can match white wall coatings or use stainless steel in areas exposed to stronger disinfectants and frequent handling.
Key Features
A continuous gasket closes the clearance gap between the access door and its rigid frame.
Concealed hinges protect hardware from contamination and accidental impact.
Optional locking controls entry to utilities without adding a separate surface-mounted cabinet.
Replaceable doors allow local repair while the surrounding cleanroom wall remains undisturbed.
Préoccupations du client produit
Wall service access must remain secure and easy to clean while preserving the flat surface and air seal of the surrounding partition.
Removing a complete wall panel for minor valve service disrupts the controlled room.A dedicated access leaf exposes only the required service zone and closes again on its original gasket.
Surface-mounted cabinets obstruct corridors and collect dust on horizontal edges.A recessed frame keeps the hatch flush with the cleanroom wall face.
Repeated opening can produce an uneven gap around a light-duty door.A reinforced frame and adjustable concealed hinges maintain alignment and gasket compression.
Unrestricted latches allow unauthorized entry to critical controls.A concealed key or budget lock limits access while keeping the external surface uncluttered.
Les applications typiques
Wall-mounted valve accessElectrical control inspection pointsLow return-air damper serviceLaboratory utility maintenanceClean corridor MEP access
Paramètres techniques
Common flush cleanroom wall access-panel ranges are listed below.
| Matériaux de base | Galvanized-steel door tray and reinforced steel perimeter frame |
|---|---|
| Panneau épaisseur | Approximately 86 mm frame depth; reduced-depth frames available |
| Largeur effective | 200–600 mm clear single-leaf width |
| Longueur maximale | 1200 mm leaf height |
| Acier face épaisseur | 0.9 mm door tray and 1.2 mm frame |
| Densité Core | N/A — hollow reinforced metal access door |
| Conductivité thermique | N/A — uninsulated maintenance hatch |
| surface finie | Powder-coated galvanized steel, antibacterial coating or brushed stainless steel |
| Type joint | Flush gasketed door with concealed hinges and push catch or hidden lock |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Single, double or multi-door layoutPush catch, budget lock or security lockAntibacterial powder coatPlastic-coated or stainless steel face
Planning a Cleanroom Wall Access Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
