Rectangular cleanroom air distribution plenum box with round side spigot

クリーンルーム空気分配システム

クリーンルーム空気配分プレナムボックス

A sealed duct-to-terminal transition box that converts inlet velocity into even static pressure across a cleanroom diffuser, grille or linear slot outlet.

Pressure Equalization
Gasketed Duct Spigot
Terminal-Wide Air Distribution
Accessible Balancing Module

見積もりリクエスト製品案内

商品紹介

The cleanroom air distribution plenum box sits between a branch duct and the larger face of a diffuser or grille. Its internal volume reduces inlet velocity and allows pressure to spread before air reaches the terminal, preventing concentrated discharge beneath the spigot. Galvanized or stainless sheet construction forms a sealed path with a gasketed round connection, and an optional removable measuring damper provides room-side balancing. Non-fibrous or faced acoustic lining can reduce duct noise where the material is isolated from the clean airstream.

主要な特徴

The expanding chamber lowers dynamic pressure and distributes static pressure across the terminal face.

A rubber-sealed round spigot limits leakage at the branch duct connection.

Removable measurement and adjustment modules allow balancing through the diffuser opening.

Square, rectangular and full-length linear configurations match different cleanroom air terminals.

お客様の製品に関する懸念事項

A direct duct connection can leave a large diffuser face starved at the edges and noisy at the center unless velocity is equalized first.

Air exits only from the terminal area closest to the duct inlet.Adequate plenum depth and an internal distribution plate spread pressure across the complete outlet.

A balancing damper above the ceiling cannot be reached after handover.A removable control module is accessible through the diffuser or grille face from the room side.

Duct noise passes directly through a lightweight terminal outlet.Optional faced attenuation material and reduced internal velocity limit regenerated and transmitted sound.

Field-cut spigot joints leak into the ceiling void.Factory-formed beaded connections with integral rubber gaskets provide a repeatable sealed duct interface.

典型的な用途

Ceiling diffuser connection boxesLinear slot diffuser plenumsReturn and exhaust grille transitionsCleanroom wall outlet branchesLow-turbulence perforated diffuser housings

技術的なパラメータ

Typical materials and dimensional ranges for a cleanroom diffuser or grille plenum box are listed below.

コア材料	Galvanized-steel or 304 stainless-steel box with optional faced polyester-fibre sound attenuation
パネルの厚さ	0.8–1.2 mm folded and sealed plenum panels
有効幅	200–1200 mm terminal connection width
最大長さ	Up to 2000 mm per linear plenum section
鋼鉄の厚さを直面する	0.8–1.2 mm galvanized or stainless plenum sheet
コア密度	Approximately 7850 kg/m³ for the steel plenum casing
熱伝導率	Approximately 45–60 W/(m·K) for the steel plenum casing
表面仕上げ	Clean galvanized finish, white powder coat or brushed 304 stainless steel
ジョイントタイプ	Folded sealed box seams with gasketed round spigot and flanged terminal connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Top, side or multiple duct spigotsAirflow measuring and balancing moduleFaced polyester acoustic attenuationSquare, rectangular or continuous linear construction

Planning a Cleanroom Air Distribution Plenum Box specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する