Rectangular cleanroom air distribution plenum box with round side spigot

클린룸 공기 분배 시스템

클린룸 공기 분배 플레늄 박스

A sealed duct-to-terminal transition box that converts inlet velocity into even static pressure across a cleanroom diffuser, grille or linear slot outlet.

Pressure Equalization
Gasketed Duct Spigot
Terminal-Wide Air Distribution
Accessible Balancing Module

견적 요청 제품 찾아보기

상품 소개

The cleanroom air distribution plenum box sits between a branch duct and the larger face of a diffuser or grille. Its internal volume reduces inlet velocity and allows pressure to spread before air reaches the terminal, preventing concentrated discharge beneath the spigot. Galvanized or stainless sheet construction forms a sealed path with a gasketed round connection, and an optional removable measuring damper provides room-side balancing. Non-fibrous or faced acoustic lining can reduce duct noise where the material is isolated from the clean airstream.

주요 기능

The expanding chamber lowers dynamic pressure and distributes static pressure across the terminal face.

A rubber-sealed round spigot limits leakage at the branch duct connection.

Removable measurement and adjustment modules allow balancing through the diffuser opening.

Square, rectangular and full-length linear configurations match different cleanroom air terminals.

고객 제품 관심사

A direct duct connection can leave a large diffuser face starved at the edges and noisy at the center unless velocity is equalized first.

Air exits only from the terminal area closest to the duct inlet.Adequate plenum depth and an internal distribution plate spread pressure across the complete outlet.

A balancing damper above the ceiling cannot be reached after handover.A removable control module is accessible through the diffuser or grille face from the room side.

Duct noise passes directly through a lightweight terminal outlet.Optional faced attenuation material and reduced internal velocity limit regenerated and transmitted sound.

Field-cut spigot joints leak into the ceiling void.Factory-formed beaded connections with integral rubber gaskets provide a repeatable sealed duct interface.

일반적인 응용 프로그램

Ceiling diffuser connection boxesLinear slot diffuser plenumsReturn and exhaust grille transitionsCleanroom wall outlet branchesLow-turbulence perforated diffuser housings

기술 매개변수

Typical materials and dimensional ranges for a cleanroom diffuser or grille plenum box are listed below.

핵심 재료	Galvanized-steel or 304 stainless-steel box with optional faced polyester-fibre sound attenuation
패널 두께	0.8–1.2 mm folded and sealed plenum panels
유효 폭	200–1200 mm terminal connection width
최대 길이	Up to 2000 mm per linear plenum section
강철 면면 두께	0.8–1.2 mm galvanized or stainless plenum sheet
코어 밀도	Approximately 7850 kg/m³ for the steel plenum casing
열전도도 (Thermal Conductivity)	Approximately 45–60 W/(m·K) for the steel plenum casing
표면 마무리	Clean galvanized finish, white powder coat or brushed 304 stainless steel
접합 유형	Folded sealed box seams with gasketed round spigot and flanged terminal connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Top, side or multiple duct spigotsAirflow measuring and balancing moduleFaced polyester acoustic attenuationSquare, rectangular or continuous linear construction

Planning a Cleanroom Air Distribution Plenum Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.