Jaringan Multi-Pintu Cleanroom Interlock Sistem
- Distributed Door Modules
- Scalable Interlock Zones
- Central Status Supervision
- Facility-System Interfaces
Perkenalan produk
The networked multi-door system separates local door control from facility-level supervision. Door modules near each airlock collect position, request and lock signals, while a central controller coordinates interlock groups and communicates status to authorized operators. This architecture reduces long individual cable runs and allows zones to be expanded or reconfigured without replacing every field device. It is intended for facilities with several interconnected airlocks rather than a single two- or three-door vestibule.
Fitur utama:
Configurable zones define which doors are mutually exclusive without hardwiring every relationship.
Central supervision displays door state, held-open alarms and controller communication faults.
Dry-contact or standard network interfaces exchange selected status with access control, fire alarm, BMS or SCADA systems.
Kekhawatiran produk pelanggan
Large interlock schemes must remain understandable and serviceable as door counts increase, while a network fault must not produce uncontrolled door behavior.
Aplikasi yang Tipis
Parameter teknis
Representative physical and interface ranges for a distributed multi-door interlock platform are listed below.
| Bahan inti | Central supervisory controller, distributed door I/O modules, regulated supplies, relays and network interfaces |
|---|---|
| Ketebalan Panel (Panel Thickness) | 100–200 mm central cabinet depth; 60–120 mm local module depth |
| Efektif lebar | 300–600 mm central cabinet width |
| Panjang maksimum | 800 mm central cabinet height |
| Baja menghadap ketebalan | 1.2–1.5 mm powder-coated steel cabinet; stainless local stations typically 1.2–2.0 mm |
| Kepadatan inti (core density) | Approximately 1800–1920 kg/m³ for the controller and distributed-I/O PCB laminates |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.4–0.7 W/(m·K) for the PCB laminates used in the networked modules |
| Permukaan selesai | Powder-coated central cabinet, sealed local modules and brushed stainless operator plates |
| Jenis Bersama | Networked distributed I/O with local lock/contact terminals, supervised communications and isolated auxiliary interfaces |
| Customization (Kustomisasi) | A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan |
Pilihan yang tersedia
Planning a Networked Multi-Door Cleanroom Interlock System specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam