Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Alimentation électrique ininterrompue
An online UPS system that conditions incoming power and maintains critical cleanroom controls through short supply interruptions.
- Double-Conversion Power Path
- Modular Battery Backup
- Automatic Static Bypass
- Networked Battery Monitoring
Introduction de produit
The UPS rectifies the incoming supply to a DC bus and continuously regenerates a stable AC output through its inverter. Rechargeable battery modules support the DC bus when utility power is lost, while an automatic static bypass provides an alternate path for overload or internal fault conditions. A local color display and network card report load, runtime, battery health and alarm state.
Key Features
Hot-serviceable battery modules allow capacity to be matched to required runtime.
The static bypass transfers the load without a mechanical switching delay.
A front display presents load percentage, battery condition and active alarms.
Network monitoring sends power events to the facility management system.
Préoccupations du client produit
Backup power must preserve control and data continuity while making battery condition and remaining runtime visible before an outage occurs.
A brief utility dip restarts controllers and interrupts batch records.The continuously energized inverter maintains a stable output through input disturbances.
Battery capacity degrades unnoticed between maintenance visits.Monitored battery modules report health and replacement conditions.
UPS maintenance requires a complete load shutdown.A static and optional maintenance bypass provides an alternate supply path.
Operators overload the unit as new equipment is connected.The display and network interface show real-time load headroom and alarm thresholds.
Les applications typiques
Cleanroom control systemsEnvironmental monitoring serversAccess and interlock controlsCritical laboratory instruments
Paramètres techniques
Typical configurable construction ranges for an uninterruptible power supply are listed below.
| Matériaux de base | Powder-coated steel rack or tower enclosure with rectifier, inverter, static bypass, control electronics and battery modules |
|---|---|
| Panneau épaisseur | 450-900 mm cabinet or rack depth |
| Largeur effective | 440-800 mm enclosure width |
| Longueur maximale | Up to 2000 mm overall cabinet height |
| Acier face épaisseur | 1.0-1.8 mm powder-coated steel chassis and access panels |
| Densité Core | Approximately 7850 kg/m³ for the structural steel enclosure |
| Conductivité thermique | 45-60 W/(m·K) for the carbon-steel chassis |
| surface finie | White, light-grey or black powder-coated cabinet with color LCD and green/amber/red status indicators |
| Type joint | Modular rack or tower chassis with plug-in power/battery modules, protected terminals and bypass connection |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single- or three-phase input/outputLithium-ion or valve-regulated lead-acid batteriesExternal maintenance bypassNetwork management card
Planning a Uninterruptible Power Supply specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
