Cleanroom uninterruptible power supply cabinet with black display and status lights

클린룸 조명 및 전기 장비

무정전 전원 공급 장치

An online UPS system that conditions incoming power and maintains critical cleanroom controls through short supply interruptions.

Double-Conversion Power Path
Modular Battery Backup
Automatic Static Bypass
Networked Battery Monitoring

견적 요청 제품 찾아보기

상품 소개

The UPS rectifies the incoming supply to a DC bus and continuously regenerates a stable AC output through its inverter. Rechargeable battery modules support the DC bus when utility power is lost, while an automatic static bypass provides an alternate path for overload or internal fault conditions. A local color display and network card report load, runtime, battery health and alarm state.

주요 기능

Continuous conversion isolates critical loads from common voltage variation.

Hot-serviceable battery modules allow capacity to be matched to required runtime.

The static bypass transfers the load without a mechanical switching delay.

A front display presents load percentage, battery condition and active alarms.

Network monitoring sends power events to the facility management system.

고객 제품 관심사

Backup power must preserve control and data continuity while making battery condition and remaining runtime visible before an outage occurs.

A brief utility dip restarts controllers and interrupts batch records.The continuously energized inverter maintains a stable output through input disturbances.

Battery capacity degrades unnoticed between maintenance visits.Monitored battery modules report health and replacement conditions.

UPS maintenance requires a complete load shutdown.A static and optional maintenance bypass provides an alternate supply path.

Operators overload the unit as new equipment is connected.The display and network interface show real-time load headroom and alarm thresholds.

일반적인 응용 프로그램

Cleanroom control systemsEnvironmental monitoring serversAccess and interlock controlsCritical laboratory instruments

기술 매개변수

Typical configurable construction ranges for an uninterruptible power supply are listed below.

핵심 재료	Powder-coated steel rack or tower enclosure with rectifier, inverter, static bypass, control electronics and battery modules
패널 두께	450-900 mm cabinet or rack depth
유효 폭	440-800 mm enclosure width
최대 길이	Up to 2000 mm overall cabinet height
강철 면면 두께	1.0-1.8 mm powder-coated steel chassis and access panels
코어 밀도	Approximately 7850 kg/m³ for the structural steel enclosure
열전도도 (Thermal Conductivity)	45-60 W/(m·K) for the carbon-steel chassis
표면 마무리	White, light-grey or black powder-coated cabinet with color LCD and green/amber/red status indicators
접합 유형	Modular rack or tower chassis with plug-in power/battery modules, protected terminals and bypass connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single- or three-phase input/outputLithium-ion or valve-regulated lead-acid batteriesExternal maintenance bypassNetwork management card

Planning a Uninterruptible Power Supply specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.