Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Porte de salle blanche
A complete hygienic steel doorset built around a dense mineral-wool core, reinforced frame and intumescent edge system for cleanroom boundaries that also require fire compartmentation.
- Mineral-Wool Insulated Leaf
- Intumescent Perimeter Protection
- Hygienic Powder-Coated Faces
- Reinforced Complete Doorset
Introduction de produit
The Fire-Rated Cleanroom Door combines the smooth surfaces expected in a controlled room with the heavier leaf, frame reinforcement and heat-reactive seals used in a fire-resisting doorset. Dense mineral wool fills the steel leaf, while intumescent strips are protected within the perimeter detail. Hinges, latch, closer, glazing and frame anchors are selected as parts of one compatible assembly rather than added independently after manufacture.
Key Features
Protected intumescent strips expand under heat without creating everyday cleaning ledges.
Reinforced hinge and closer zones control the greater mass of a fire-resisting leaf.
Powder-coated galvanized faces remain smooth for routine cleanroom housekeeping.
Optional fire-resisting glazing preserves observation in compatible door configurations.
Préoccupations du client produit
A fire-rated cleanroom opening must retain hygienic surfaces without weakening the complete door assembly through unsuitable seals, hardware or site modifications.
A standard lightweight cleanroom leaf does not provide the mass or edge protection needed at a fire boundary.Mineral wool, reinforced steel skins and protected intumescent seals form a purpose-built heavy-duty leaf.
Projecting fire seals create additional dirt traps around the opening.Intumescent material is recessed within a smooth perimeter carrier and protected in normal service.
Heavy leaves sag when ordinary cleanroom hinges are retained.Load-rated hinges and reinforced fixing plates spread the increased door mass into the frame.
Unplanned glazing or access hardware interrupts the intended barrier.Compatible vision panels, closers and latching preparations are incorporated during doorset manufacture.
Les applications typiques
Pharmaceutical fire compartmentsBattery manufacturing clean areasLaboratory escape routesHealthcare cleanroom boundariesControlled technical plant access
Paramètres techniques
Typical physical construction values for a mineral-wool fire-rated cleanroom doorset are shown below.
| Matériaux de base | High-density non-combustible mineral wool |
|---|---|
| Panneau épaisseur | 50-60 mm insulated door leaf |
| Largeur effective | 800-1250 mm single-leaf clear opening |
| Longueur maximale | 2400 mm maximum leaf height |
| Acier face épaisseur | 1.0-1.2 mm galvanized or stainless steel skins |
| Densité Core | 96-140 kg/m³ mineral wool |
| Conductivité thermique | 0.035-0.045 W/(m·K) typical mineral-wool range |
| surface finie | Smooth powder-coated galvanized steel or brushed stainless steel |
| Type joint | Rebated steel frame with protected intumescent strip and elastomer smoke/cleanroom seal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Single or double doorsetCompatible fire-resisting vision panelStainless steel surface finishPanic exit and controlled-access hardware
Planning a Fire-Rated Cleanroom Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
