Complete fire-rated cleanroom door with reinforced steel frame

클린룸 도어, 창문 및 인터락 시스템

화재 등급 클린룸 도어

A complete hygienic steel doorset built around a dense mineral-wool core, reinforced frame and intumescent edge system for cleanroom boundaries that also require fire compartmentation.

Mineral-Wool Insulated Leaf
Intumescent Perimeter Protection
Hygienic Powder-Coated Faces
Reinforced Complete Doorset

견적 요청 제품 찾아보기

상품 소개

The Fire-Rated Cleanroom Door combines the smooth surfaces expected in a controlled room with the heavier leaf, frame reinforcement and heat-reactive seals used in a fire-resisting doorset. Dense mineral wool fills the steel leaf, while intumescent strips are protected within the perimeter detail. Hinges, latch, closer, glazing and frame anchors are selected as parts of one compatible assembly rather than added independently after manufacture.

주요 기능

Dense mineral wool supports the door's thermal and acoustic barrier construction.

Protected intumescent strips expand under heat without creating everyday cleaning ledges.

Reinforced hinge and closer zones control the greater mass of a fire-resisting leaf.

Powder-coated galvanized faces remain smooth for routine cleanroom housekeeping.

Optional fire-resisting glazing preserves observation in compatible door configurations.

고객 제품 관심사

A fire-rated cleanroom opening must retain hygienic surfaces without weakening the complete door assembly through unsuitable seals, hardware or site modifications.

A standard lightweight cleanroom leaf does not provide the mass or edge protection needed at a fire boundary.Mineral wool, reinforced steel skins and protected intumescent seals form a purpose-built heavy-duty leaf.

Projecting fire seals create additional dirt traps around the opening.Intumescent material is recessed within a smooth perimeter carrier and protected in normal service.

Heavy leaves sag when ordinary cleanroom hinges are retained.Load-rated hinges and reinforced fixing plates spread the increased door mass into the frame.

Unplanned glazing or access hardware interrupts the intended barrier.Compatible vision panels, closers and latching preparations are incorporated during doorset manufacture.

일반적인 응용 프로그램

Pharmaceutical fire compartmentsBattery manufacturing clean areas실험실 탈출 경로Healthcare cleanroom boundariesControlled technical plant access

기술 매개변수

Typical physical construction values for a mineral-wool fire-rated cleanroom doorset are shown below.

핵심 재료	High-density non-combustible mineral wool
패널 두께	50-60 mm insulated door leaf
유효 폭	800-1250 mm single-leaf clear opening
최대 길이	2400 mm maximum leaf height
강철 면면 두께	1.0-1.2 mm galvanized or stainless steel skins
코어 밀도	96-140 kg/m³ mineral wool
열전도도 (Thermal Conductivity)	0.035-0.045 W/(m·K) typical mineral-wool range
표면 마무리	Smooth powder-coated galvanized steel or brushed stainless steel
접합 유형	Rebated steel frame with protected intumescent strip and elastomer smoke/cleanroom seal
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Single or double doorsetCompatible fire-resisting vision panelStainless steel surface finishPanic exit and controlled-access hardware

Planning a Fire-Rated Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.