Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Hygienische Luftbehandlungseinheit
A cleanable air handler with corrosion-resistant inner surfaces, drainable wet sections and removable components for hygiene-sensitive facilities.
- Drainable Wet Sections
- Corrosion-Resistant Interior
- Removable Treatment Components
- Accessible Cleanable Surfaces
Produkteinführung
The hygienic air handling unit emphasizes internal access, drainage and material compatibility wherever treated air may affect sensitive occupants or products. Smooth metal lining covers insulation and frame cavities, service doors provide access to both faces of coils and filters, and condensate pans extend beneath the complete coil and eliminator assembly. Fans are selected without belt debris in the airstream, and seals use closed-cell materials that do not retain moisture. The result is a serviceable unit for hospitals, food processing and hygiene-critical manufacturing.
Key Features
Coil sections use fully drainable pans and accessible eliminators to control water carryover.
Pull-out filters, coils and service panels reduce inaccessible surfaces during periodic cleaning.
Direct-drive fans remove belts and pulleys from the treated airstream.
Kunden Produktbedenken
Hygienic air treatment fails when moisture, retained debris or inaccessible surfaces remain inside the equipment between maintenance intervals.
Condensate remains at the far end of a flat drain pan.A multi-directional sloped pan drains the complete coil footprint toward a trapped outlet.
Fibrous insulation is exposed at panel edges or service openings.Continuous metal inner skins and sealed panel joints isolate the insulation from the air stream.
The downstream coil face cannot be inspected without dismantling the unit.Dedicated service sections and removable eliminators provide access to both sides of wet components.
Belt particles enter supply air from the fan section.Direct-drive plug fans or EC fan arrays eliminate belt wear inside the casing.
Typische Anwendungen
Hospital operating departmentsPharmaceutical productionFood and beverage clean processingClinical laboratoriesPersonal-care manufacturing
Technische Parameter
Representative construction data for a hygiene-oriented air handling unit are shown below.
| Core Material | Non-hygroscopic closed-cell polyurethane or sealed high-density mineral-wool insulation |
|---|---|
| Panel Dicke | 50–70 mm hygienic double-skin casing |
| Effektive Breite | 1000–3800 mm nominal casing width |
| Maximale Länge | Up to 12000 mm in cleanable modular sections |
| Stahl facing Dicke | 0.8–1.2 mm internal liner and 0.6–1.0 mm external skin |
| Kerndichte | 42–45 kg/m³ polyurethane or 90–120 kg/m³ mineral wool |
| Thermische Leitfähigkeit | 0.022–0.040 W/(m·K), based on selected casing insulation |
| Oberfläche Finish | Smooth 304 stainless-steel or coated galvanized interior with powder-coated exterior |
| Gemeinsamer Typ | Flush sealed panel joints with closed-cell gaskets and radiused internal transitions |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
304 or 316L stainless-steel inner liningUV-resistant outdoor coatingRemovable coil and fan assembliesBag, compact and absolute-filter housings
Planning a Hygienic Air Handling Unit specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
