Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Flanschende Kanal elektrische Heizung
A complete flanged duct section containing one six-element electric heater rack, external controls and airflow-related safety devices.
- Single Six-Element Rack
- Flanged Duct Installation
- External Safety Controls
- Withdrawable Heater Assembly
Produkteinführung
The flanged duct heater mounts directly between rectangular duct sections and places six horizontal resistance elements across one airflow opening. Ceramic supports maintain element spacing, while the attached electrical enclosure houses contactors, terminals and high-limit protection. An airflow switch and staged controller prevent full power under inadequate ventilation, and the complete element rack can be withdrawn from the housing for inspection.
Key Features
Six horizontal elements form one uniform bank rather than separate obstructive columns.
The external control enclosure keeps contactors and wiring out of the heated airflow.
A manual-reset high limit and airflow interlock interrupt heating before unsafe temperature rise.
Kunden Produktbedenken
A duct heater must match airflow, electrical load and safety control without creating a high-pressure obstruction.
Low airflow can overheat the elements and adjacent duct insulation.Airflow proving and independent high-limit cutouts interrupt the contactor circuit.
Multiple narrow element columns cause uneven leaving-air temperature.One six-element rack spans the active width with consistent horizontal spacing.
Service access requires dismantling long duct runs.The heater rack withdraws laterally while the flanged outer housing remains installed.
Power switching generates heat and dust inside the airstream.Contactors, fuses and terminals are enclosed in the external side control cabinet.
Typische Anwendungen
Cleanroom supply-duct trim heatingOutdoor-air temperingTerminal reheat branchesLaboratory exhaust replacement airProcess-air temperature maintenance
Technische Parameter
Representative dimensions and materials for a single-bank flanged duct heater are listed below.
| Core Material | Nickel-chromium resistance elements on ceramic supports inside galvanized duct housing |
|---|---|
| Panel Dicke | 1.0-1.5 mm galvanized duct casing thickness |
| Effektive Breite | 300-1800 mm active duct opening width |
| Maximale Länge | Up to 900 mm overall casing depth in the airflow direction |
| Stahl facing Dicke | 1.0-1.5 mm galvanized casing and control-box sheet |
| Kerndichte | Approximately 8300 kg/m³ for the nickel-chromium resistance elements |
| Thermische Leitfähigkeit | Approximately 15 W/(m·K) for nickel-chromium resistance wire at room temperature |
| Oberfläche Finish | Bright galvanized steel housing with exposed nickel-chromium elements and glazed ceramic supports |
| Gemeinsamer Typ | Bolted duct flanges with slide-out six-element rack and gasketed control enclosure |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Staged contactor, SCR or thyristor controlAirflow switch and differential-pressure provingAutomatic and manual-reset high limitsCustom flange size, voltage and control-box side
Planning a Flanged Duct Electric Heater specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
