Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Gleichdruckfilter Clamping Assembly
A stainless swing-bolt and bearing-bar mechanism that applies balanced compression to a filter gasket while moving clear for element removal.
- Uniform Gasket Compression
- Swing-Clear Service
- Tool-Controlled Adjustment
- Stainless Hardware
Produkteinführung
This assembly secures box-style HEPA, ULPA or compact filters against a flat sealing flange. Threaded swing bolts pull a rigid equal-bearing bar toward the frame so the load is spread along the filter edge rather than concentrated at isolated clips. Captive pivots keep components attached during maintenance, and the bar swings or slides away from the opening when loosened. Stainless construction suits repeated use in clean and corrosive air systems.
Key Features
Threaded adjustment accommodates small differences in gasket and frame depth.
Captive pivots prevent loose hardware from falling into the air system.
The assembly moves outside the filter envelope for unrestricted removal.
Kunden Produktbedenken
Uneven or improvised clamps can over-compress one gasket corner while leaving another side open to bypass.
Point clips leave low-pressure areas along a long filter edge.A rigid bearing bar distributes load over a wider sealing line.
Clamp parts are lost during overhead filter replacement.Captive bolts and pivots remain attached to the holding frame.
Different filter depths require new retaining hardware.Threaded travel allows the assembly to suit a defined range of frame and gasket heights.
The clamp blocks the filter as technicians pull it forward.Swing-clear geometry opens the complete removal path after release.
Typische Anwendungen
Gasket-seal HEPA holding framesSide-access filter housingsBuilt-up absolute filter banksCleanroom terminal boxesIndustrial compact-filter racks
Technische Parameter
Typical material and dimensional ranges for an equal-pressure filter clamp are shown below.
| Core Material | 304 stainless-steel swing bolts, pivots, equal-bearing bar and captive fasteners |
|---|---|
| Panel Dicke | 2.0–4.0 mm formed bearing bar and mounting plates |
| Effektive Breite | 150–610 mm bearing length per filter edge |
| Maximale Länge | Up to 650 mm overall clamp assembly length |
| Stahl facing Dicke | 2.0–4.0 mm stainless bearing and bracket components |
| Kerndichte | Approximately 8000 kg/m³ for 304 stainless-steel parts |
| Thermische Leitfähigkeit | Approximately 14–17 W/(m·K) for passivated stainless clamp hardware |
| Oberfläche Finish | Passivated stainless steel with smooth deburred edges |
| Gemeinsamer Typ | Captive swing-bolt pivot with threaded compression adjustment and equal-bearing retainer |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single- or dual-bolt bearing barHand knob or tool-operated nutFrame-mounted or housing-mounted bracketAlternate travel for different filter depths
Planning a Equal-Pressure Filter Clamping Assembly specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
