Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de utilidad de Cleanroom
Wet Gas Scrubber
Compact point-of-use wet scrubber with a recirculated wash stage, packed gas-liquid contact section, spray distribution and final mist separation for water-soluble process exhaust contaminants.
- Local treatment close to wet-process exhaust sources
- Packed counter-current contact with controlled liquid recirculation
- Integrated droplet separation and process-tool interfaces
Introducción del producto
The Wet Gas Scrubber is a compact point-of-use system for exhaust from semiconductor wet-clean tools and other processes that release compatible water-soluble gases, droplets or salts. Contaminated air enters a dedicated pre-scrub zone, moves upward through an irrigated packed column and leaves through a mist eliminator. A recirculation tank, chemical-resistant pump and spray header maintain liquid distribution while the controller supervises level, flow, pressure and selected liquid-condition signals. One- and two-stage arrangements allow different scrubbing liquids where the chemistry requires separation. Gas identity, loading, reaction products, liquid composition, blowdown and downstream monitoring remain application-specific design inputs.
Características clave
Counter-current packing provides a large wetted surface within a compact cabinet footprint
A pre-scrub spray zone intercepts droplets and reduces direct loading on the packed section
Dedicated circulation tank and chemical-resistant pump maintain stable wash-liquid delivery
A final demister limits liquid carryover into the clean-gas connection
Separate stage options allow incompatible absorption chemistries to remain isolated
Level, circulation-flow and pressure signals support practical alarm and interlock logic
Front and side service access keeps pump, tank, spray header and packing reachable
Process-tool communication can coordinate standby, operating and bypass conditions
Polypropylene wetted parts provide a practical material basis for many compatible aqueous duties
Preocupaciones del producto del cliente
Wet scrubbing performance depends on contaminant chemistry and controlled gas-liquid contact. Stable pressure, compatible materials, liquid condition, solids management and carryover control must be established for the installed process.
A water-soluble contaminant can still pass through when the selected liquid does not provide enough absorption or reaction capacityDefine the gas mixture, concentration and reaction chemistry, then select water, acid or alkaline liquor and contact stages accordingly.
Uneven spray distribution or dry packing zones reduce the effective mass-transfer areaUse a correctly sized spray header, verify recirculation flow and include accessible nozzles for inspection and cleaning.
Salts and particulate by-products can block nozzles, packing or drain passagesAssess solids formation, provide suitable blowdown and filtration, and set maintenance triggers from the real loading profile.
Pressure variation at the process tool can disturb sensitive wet-clean operationCoordinate fan control, duct resistance, bypass logic and pressure monitoring with the tool exhaust requirement.
Mist carryover can wet downstream ducts and transfer absorbed chemistry beyond the scrubberMatch gas velocity to the demister, monitor liquid condition and keep the separator accessible for washing or replacement.
Combining incompatible acids, bases or oxidizers in one loop can create heat, precipitate or hazardous reactionsReview the complete exhaust recipe and separate wash stages or exhaust streams when one recirculation chemistry is not safe.
Aplicaciones típicas
Single-wafer wet-clean exhaust containing compatible acid, ammonia or water-soluble solvent vaporsSemiconductor and display wet benches producing droplets, salts and soluble chemical fumesPhotovoltaic and electronics cleaning tools requiring localized wet exhaust treatmentPilot-line chemical processes with variable but characterized aqueous exhaust loadsClean-manufacturing subfabs where compact local treatment reduces central scrubber demand
Parámetros técnicos
The displayed basis is a compact single-stage cabinet approximately 1500 mm wide, 1100 mm deep and 2000 mm high, with polypropylene wetted internals, one packed column, one recirculation tank, one pump and a final mist eliminator. The site's fixed ten-row schema uses panel-oriented labels; here Panel Thickness represents cabinet depth and Steel Facing Thickness describes the removable outer panels rather than the polypropylene process vessel. Exhaust flow, contaminant load, liquid chemistry, packing depth, pump duty, blowdown and controls are selected for the actual process.
| Materiales Core | Welded polypropylene wetted column, tank, spray piping and packing inside a powder-coated metal support cabinet |
|---|---|
| Panel de espesor | 1100 mm representative overall cabinet depth for the selected compact single-stage basis |
| Ancho efectivo | 1500 mm representative cabinet width excluding external duct-transition clearance |
| Longitud máxima | 2000 mm representative overall height before optional upper bypass or site ductwork |
| Acero frente a espesor | 1.2 mm nominal removable powder-coated outer panels; wetted process parts are nonmetallic |
| Densidad Core | Approximately 910 kg/m³ representative density for polypropylene wetted components |
| Conductividad térmica | Approximately 0.22 W/(m·K) for representative polypropylene near room temperature |
| Superficie acabada | Warm off-white powder-coated cabinet with smooth natural-gray polypropylene wetted surfaces and restrained blue utility piping |
| Tipo conjunto | Flanged exhaust connections with fusion-welded polypropylene liquid joints and service unions at the pump, tank and spray loop |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single- or two-stage packed scrubbing arrangementWater, alkaline or acidic wash-liquid service after compatibility reviewAlternative packing type and contact depthVariable-speed circulation pump and redundant pump arrangementConductivity, pH, oxidation-reduction potential, level and flow instrumentationAutomatic make-up, dosing, blowdown and drain interfacesProcess-tool interface, bypass damper and pressure-control optionsPolypropylene, PVC, PVDF or compatible dual-laminate wetted constructionLocal touchscreen, remote alarm contacts and industrial-network connection
Planning a Wet Gas Scrubber specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
