Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro ULPA terminal
A cleanroom ceiling ULPA panel configured for direct final-air delivery from terminal housings or fan filter units into ultra-clean production zones.
- Ceiling-Terminal Format
- Uniform Downstream Face
- Shallow Mini-Pleat Pack
- Gasket or Gel Interface
Introducción del producto
The terminal ULPA filter forms the final filtration surface between a ceiling housing or fan filter unit and the cleanroom. Ultra-fine mini-pleat media is bonded into a shallow anodized-aluminium frame with a clean downstream protective grid. The frame can include a flat gasket land, a gel trough or an integral knife edge to match the terminal module. A smooth discharge face and balanced pack geometry help distribute low-turbulence air across process zones, work benches and mini-environments without adding a separate downstream duct section.
Características clave
A clean downstream grid protects the pleats and presents a uniform visible ceiling surface.
Balanced mini-pleat geometry supports even face velocity across the occupied terminal area.
Gasket, gel and knife-edge frame profiles match common ceiling housings and fan filter units.
Preocupaciones del producto del cliente
The last filtration stage must integrate cleanly with the ceiling, seal around the full perimeter and deliver uniform air directly into the controlled zone.
A remotely installed final filter allows duct leakage downstream of the filtration stage.Terminal mounting places the ULPA pack at the cleanroom boundary and shortens the clean side of the air path.
Uneven filter-face velocity disturbs sensitive work directly below the ceiling.Balanced pleat distribution and an open downstream grid promote a more uniform discharge pattern.
The filter frame does not match the ceiling housing's sealing method.Dry-gasket, gel-trough and knife-edge profiles cover the principal terminal interface types.
Exposed pleats are damaged during ceiling cleaning.A flush cleanable faceguard separates the media from routine wipe-down contact.
Aplicaciones típicas
Semiconductores Cleanroom TechoFan filter unit arraysUltra-clean process benchesPharmaceutical critical zonesPrecision assembly mini-environments
Parámetros técnicos
Representative construction ranges for ceiling-terminal ULPA panels are shown below.
| Materiales Core | Ultra-fine glass-microfibre or ePTFE ULPA media with mini-pleat separators |
|---|---|
| Panel de espesor | 69–150 mm overall terminal-filter depth |
| Ancho efectivo | 305 - 610 mm Ancho nominal de cara |
| Longitud máxima | Hasta 1220 mm de longitud nominal de cara por |
| Acero frente a espesor | 0.4–0.6 mm powder-coated or stainless-steel downstream faceguard |
| Densidad Core | Approximately 30–50 kg/m³ equivalent ULPA mini-pleat pack density |
| Conductividad térmica | Approximately 0.032–0.045 W/(m·K) for the dry ULPA media pack |
| Superficie acabada | Natural anodized aluminium with a clean white or stainless downstream grid |
| Tipo conjunto | Flat EPDM gasket, polyurethane gel channel or integral knife-edge terminal connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
U15 or U16 mediaGlass-microfibre or ePTFE packDry gasket, gel trough or knife-edge frameWhite powder-coated or stainless downstream grid
Planning a Terminal ULPA Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
