Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de distribución de aire para salas limpias
Z Motorizado Shut-Off Damper
A compact circular isolation damper whose electric or pneumatic actuator rotates one sealed blade between defined open and closed positions.
- Positive Open-Close Operation
- Sealed Single Butterfly Blade
- Selectable Spring-Return Position
- External End-Position Indication
Introducción del producto
The motorized shut-off damper inserts a single circular blade into a short galvanized duct body. A direct-mounted actuator rotates the shaft through approximately ninety degrees to isolate or restore airflow. A perimeter blade seal reduces closed leakage, and the shaft mark provides a mechanical position reference visible outside the duct. Spring-return actuator versions move to the specified open or closed position when power or control pressure is lost, while auxiliary switches can confirm the endpoints.
Características clave
The single blade and direct shaft connection provide a simple open-close movement with few linkage components.
A compressible perimeter seal restricts leakage around the circular blade in the commanded closed position.
Spring-return and end-switch options support fail-position sequences and remote proof of isolation.
Preocupaciones del producto del cliente
Reliable shut-off requires the correct fail position, enough actuator torque for seal compression and access to the drive after insulation and ceiling closure.
A modulating damper is used for isolation but never reaches a repeatable sealed endpoint.Defined open-close end stops and a matched actuator focus the mechanism on dependable shut-off travel.
Loss of control power leaves the process branch open.A spring-return actuator moves the blade to the selected normally closed safety position.
Duct insulation hides the shaft mark and actuator release.An extended mounting bracket keeps position indication, wiring and manual override outside the insulation layer.
Excessive differential pressure twists the shaft before the seal seats.Blade diameter, shaft size and actuator torque are selected together for the maximum closed pressure.
Aplicaciones típicas
Cleanroom branch shutdownLaboratory exhaust isolationEquipment purge and standby ductsAirlock supply and return isolationSmall process ventilation connections
Parámetros técnicos
Representative construction ranges for a circular motorized shut-off damper are shown below.
| Materiales Core | Galvanized or stainless-steel circular butterfly blade with elastomer perimeter seal and steel shaft |
|---|---|
| Panel de espesor | 1.0–1.5 mm single shut-off blade |
| Ancho efectivo | 80–630 mm nominal circular duct diameter |
| Longitud máxima | 200–500 mm overall casing length in the airflow direction |
| Acero frente a espesor | 0.8–1.2 mm galvanized or stainless circular casing |
| Densidad Core | Approximately 7850 kg/m³ for the steel blade and shaft assembly |
| Conductividad térmica | Approximately 45–55 W/(m·K) for galvanized carbon-steel construction |
| Superficie acabada | Mill-galvanized, powder-coated or passivated stainless-steel air path |
| Tipo conjunto | Round slip-fit or flanged casing with sealed butterfly blade and direct external actuator |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Electric or pneumatic actuatorNormally open or normally closed spring returnAuxiliary open-close switchesGalvanized, powder-coated or stainless-steel construction
Planning a Motorized Shut-Off Damper specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
