Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Caja terminal de gas médico
A recessed four-port medical gas outlet assembly with a brushed AISI 304 face panel, gas-specific keyed terminal units and one clear protective cover for a clean wall interface.
- Four Gas-Specific Outlets
- Flush-Mounted Stainless Panel
- Keyed Quick-Connect Interfaces
- Shared Clear Protective Cover
Introducción del producto
The Medical Gas Terminal Box is a compact, flush-mounted point-of-use assembly for connecting clinical equipment to a piped medical gas system. The illustrated four-port configuration arranges oxygen, vacuum, nitrous oxide and medical air in one horizontal stainless-steel panel. Each outlet combines a gas-specific keyed connector, internal shut-off function and individual copper tube tail inside a recessed galvanized-steel back box. A single top-hinged transparent cover protects the unused sockets while leaving their colour rings visible, and the radiused brushed face supports routine wipe-down around the wall interface. This terminal box is a patient-use connection panel; it is not an area shut-off valve box, pressure-monitoring alarm or ceiling supply pendant.
Características clave
Gas-specific keyed sockets help prevent a probe intended for one service from engaging a different terminal type.
Front-accessible outlet cartridges and internal maintenance shut-off functions allow a terminal position to be serviced without removing the complete recessed enclosure.
The satin AISI 304 face frame, radiused edges and shared clear cover present a low-projection surface suited to modular operating-room and clinical wall systems.
Preocupaciones del producto del cliente
A multi-service wall terminal must keep each gas path unmistakable, accessible and protected while fitting within a shallow, cleanable clinical-wall assembly.
Adjacent outlets can create a wrong-connection risk when their interfaces are visually similar.Each terminal uses a gas-specific keyed socket together with a distinct identification ring and service symbol.
A projecting surface box can obstruct equipment movement and collect dust around its upper edges.The recessed back box keeps the radiused stainless face panel close to the finished wall for a compact wipe-down interface.
Unprotected sockets may collect debris or be struck while no clinical device is connected.One transparent hinged cover shields all four unused terminal faces while preserving a clear view of their colour identification.
Servicing one worn connector can become disruptive when the whole panel must be removed or the gas paths are not individually accessible.Front-removable terminal cartridges, separate rear valve bodies and individual copper tails create a defined service route for each outlet position.
Aplicaciones típicas
Modular operating-room wall systemsPost-anesthesia care and recovery baysIntensive-care and high-dependency treatment roomsHospital procedure rooms and clinical clean areas
Parámetros técnicos
Typical configurable construction values for the illustrated four-port recessed medical gas terminal box are listed below.
| Materiales Core | Machined brass terminal bodies, copper tube tails, AISI 304 stainless-steel face panel, galvanized-steel recessed box and clear polycarbonate cover |
|---|---|
| Panel de espesor | 1.2 mm nominal brushed stainless face-panel sheet |
| Ancho efectivo | 585 mm nominal four-outlet face-panel width |
| Longitud máxima | Up to 585 mm overall horizontal panel length |
| Acero frente a espesor | 1.2 mm AISI 304 stainless-steel front facing |
| Densidad Core | 8500 kg/m³ for representative machined brass terminal components |
| Conductividad térmica | 116 W/(m·K) for representative C36000 brass at room temperature |
| Superficie acabada | Vertical-grain satin AISI 304 face with visible gas-service colour rings and a clear polycarbonate protective cover |
| Tipo conjunto | Four gas-specific keyed quick-connect terminal cartridges with internal check valves and individual 10-12 mm copper pipe tails |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
BS, DIN, AFNOR or other project-selected gas-specific terminal interfacesFour service positions selected from oxygen, vacuum, medical air, nitrous oxide and other compatible pipeline servicesStraight, upward or side-entry copper tube-tail arrangement within the recessed boxAlternative face-panel width, stainless finish and protective-cover configuration
Planning a Medical Gas Terminal Box specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
