Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Limpieza de sala limpia, desinfección y esterilización
Lavadora de ropa de cuarto limpio
A hygienic barrier washing machine that transfers reusable cleanroom garments from a soiled loading area to a separated clean-side unloading area.
- Opposed loading and unloading doors protect zone separation
- Programmable wash profiles support technical garment care
- Flush stainless fascia simplifies clean-side housekeeping
Introducción del producto
The cleanroom garment washer is a pass-through barrier unit for controlled laundering of coveralls, hoods, overshoes, and compatible textile accessories. Stainless process surfaces, opposed interlocked doors, automatic dosing connections, and configurable recipes support a documented laundry flow. Final cycle selection remains dependent on the garment supplier's care limits and the site's contamination-control procedure.
Características clave
Interlock prevents both drum doors opening together
Stainless-steel drum and clean-side fascia
Programmable wash, rinse, and extraction stages
Controlled detergent and additive dosing connections
Adjustable drum speed and reversing action
High-extraction configuration to reduce retained moisture
Partition seal interface for hygienic installation
Preocupaciones del producto del cliente
Reusable cleanroom garments must be washed without uncontrolled contact between used and processed loads. Aggressive mechanical action, residual chemistry, and an unsuitable final rinse can shorten garment life or leave particles and extractables.
How is clean and soiled laundry kept apart?Opposed doors, a sealed partition interface, and door interlocking enforce a one-way transfer through the washer.
Can cycles protect technical fabrics?Programmable drum action, temperature, water level, extraction speed, and dosing allow recipes to follow garment care requirements.
How are detergent residues controlled?Metered dosing and configurable intermediate and final rinses allow chemistry removal targets to be built into the cycle.
Is the machine practical to clean?Flush stainless panels, accessible seals, drainable wetted surfaces, and service access outside the critical unload face support housekeeping.
Aplicaciones típicas
Pharmaceutical cleanroom laundriesSemiconductor garment processingMedical-device manufacturing facilitiesBiotechnology controlled areasElectronics cleanroom supportHospital sterile-service laundries
Parámetros técnicos
A horizontal perforated drum is accessed through interlocked doors on opposite sides of the machine. The washer can be sealed into a partition so incoming garments and washed garments follow a one-way route. Programmable water levels, temperature, drum action, dosing, extraction, and rinsing allow cycles to be matched to garment construction.
| Materiales Core | Stainless-steel drum and wetted components with reinforced steel frame |
|---|---|
| Panel de espesor | 30–50 mm insulated enclosure panels |
| Ancho efectivo | 700–1200 mm drum and loading-face width |
| Longitud máxima | 1200–2000 mm overall machine depth |
| Acero frente a espesor | 1.0–2.0 mm stainless-steel facing |
| Densidad Core | 40–60 kg/m³ acoustic and thermal insulation where fitted |
| Conductividad térmica | 0.035–0.045 W/(m·K) for insulated enclosure sections |
| Superficie acabada | Brushed stainless clean-side fascia with smooth cleanable drum surfaces |
| Tipo conjunto | Gasketed barrier flange, interlocked drum doors, welded wetted seams, and sanitary utility connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
20–70 kg nominal dry-load capacitiesSteam or electric heatingAutomatic liquid chemical dosingPurified-water final rinseConductivity-monitored rinse endpointClean-side status displayData logging and batch reportsCustom partition trim and sealing kit
Planning a Cleanroom Garment Washer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
