Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Perfil de cubierta limpia
A two-part R50 extruded aluminium profile that replaces a sharp wall-to-floor or wall-to-ceiling inside corner with a smooth, white, wipeable cove.
- 50 mm Internal Radius
- Two-Part Clip-On Assembly
- RAL 9010 Powder-Coated Face
- 3000 mm Continuous Length
Introducción del producto
This cleanroom coving profile combines a curved aluminium cover with a separate 90-degree backing angle. The exposed cover forms a constant 50 mm concave radius between two equal returns, creating a gradual internal transition rather than the broad planar face used for skirting. The backing angle is fixed within the corner and the finished cove clips over it, keeping the primary cleanable surface free from exposed mechanical fixings. A fine-texture white polyester powder coat matches common cleanroom panel finishes while retaining enough surface definition for inspection and routine wiping.
Características clave
Equal return wings establish balanced contact along both sides of a wall-to-floor, wall-to-wall or wall-to-ceiling junction.
The concealed aluminium backing angle supports the facing without leaving screw heads across the visible curved surface.
Continuous three-metre extrusion lengths reduce the number of intermediate butt joints across long hygienic room boundaries.
White fine-texture powder coating provides a durable, low-glare finish that coordinates with common modular cleanroom panels.
Preocupaciones del producto del cliente
Square internal junctions are difficult to wipe consistently and can leave a narrow recess at the meeting line between finished room surfaces.
A sharp 90-degree inside corner concentrates dust and cleaning residue along a line that is hard to reach with a cloth or mop.The constant 50 mm concave arc replaces that tight line with one broad, accessible wiping path.
Exposed corner fixings can interrupt the finished surface and introduce small ledges around screw heads.Fasteners remain on the hidden backing angle while the clip-on cover presents an uninterrupted curved face.
Unequal profile legs can make a cove appear offset when it bridges two perpendicular panel surfaces.Two equal 50 mm returns centre the radius and maintain balanced bearing along both sides of the junction.
Flat base trim may protect a wall edge but does not remove the hard internal angle at the floor or ceiling.The deliberately concave geometry creates the hygienic radius that a planar skirting fascia cannot provide.
Aplicaciones típicas
Pharmaceutical cleanroom wall-to-floor internal junctionsBiotechnology suite wall-to-ceiling transitionsMedical-device manufacturing room cornersLaboratory and healthcare controlled-environment partitionsHygienic food and precision-production interiors
Parámetros técnicos
The values below describe the selected R50 white powder-coated aluminium cove and concealed backing-angle configuration.
| Materiales Core | Extruded EN AW-6063 aluminium coved facing with a separate aluminium backing angle |
|---|---|
| Panel de espesor | 1.2-1.5 mm nominal coved-facing wall thickness |
| Ancho efectivo | 100 mm overall across two equal 50 mm returns |
| Longitud máxima | Up to 3000 mm per continuous profile |
| Acero frente a espesor | 0 mm; the selected assembly has no steel facing |
| Densidad Core | Approximately 2700 kg/m³ for the aluminium extrusions |
| Conductividad térmica | Approximately 190-200 W/(m·K) at 20°C |
| Superficie acabada | RAL 9010 fine-texture polyester powder-coated facing with a natural aluminium backing angle |
| Tipo conjunto | Two-part clip-on corner assembly with straight butt joints and sealable longitudinal edges |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Alternative 40 mm or 45 mm internal radiiNatural anodized or panel-matched powder-coated finishesFactory-cut lengths below the 3000 mm maximumMatching end closures and three-way internal corner piecesWall-to-wall, wall-to-ceiling and wall-to-floor installation sets
Planning a Cleanroom Coving Profile specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
