Accessoires d'installation Cleanroom

Profil de Cleanroom Coving

A two-part R50 extruded aluminium profile that replaces a sharp wall-to-floor or wall-to-ceiling inside corner with a smooth, white, wipeable cove.

50 mm Internal Radius
Two-Part Clip-On Assembly
RAL 9010 Powder-Coated Face
3000 mm Continuous Length

Demander un devis. Browse les produits

Introduction de produit

This cleanroom coving profile combines a curved aluminium cover with a separate 90-degree backing angle. The exposed cover forms a constant 50 mm concave radius between two equal returns, creating a gradual internal transition rather than the broad planar face used for skirting. The backing angle is fixed within the corner and the finished cove clips over it, keeping the primary cleanable surface free from exposed mechanical fixings. A fine-texture white polyester powder coat matches common cleanroom panel finishes while retaining enough surface definition for inspection and routine wiping.

Key Features

A true concave R50 section removes the inaccessible sharp line normally created where two perpendicular room surfaces meet.

Equal return wings establish balanced contact along both sides of a wall-to-floor, wall-to-wall or wall-to-ceiling junction.

The concealed aluminium backing angle supports the facing without leaving screw heads across the visible curved surface.

Continuous three-metre extrusion lengths reduce the number of intermediate butt joints across long hygienic room boundaries.

White fine-texture powder coating provides a durable, low-glare finish that coordinates with common modular cleanroom panels.

Préoccupations du client produit

Square internal junctions are difficult to wipe consistently and can leave a narrow recess at the meeting line between finished room surfaces.

A sharp 90-degree inside corner concentrates dust and cleaning residue along a line that is hard to reach with a cloth or mop.The constant 50 mm concave arc replaces that tight line with one broad, accessible wiping path.

Exposed corner fixings can interrupt the finished surface and introduce small ledges around screw heads.Fasteners remain on the hidden backing angle while the clip-on cover presents an uninterrupted curved face.

Unequal profile legs can make a cove appear offset when it bridges two perpendicular panel surfaces.Two equal 50 mm returns centre the radius and maintain balanced bearing along both sides of the junction.

Flat base trim may protect a wall edge but does not remove the hard internal angle at the floor or ceiling.The deliberately concave geometry creates the hygienic radius that a planar skirting fascia cannot provide.

Les applications typiques

Pharmaceutical cleanroom wall-to-floor internal junctionsBiotechnology suite wall-to-ceiling transitionsMedical-device manufacturing room cornersLaboratory and healthcare controlled-environment partitionsHygienic food and precision-production interiors

Paramètres techniques

The values below describe the selected R50 white powder-coated aluminium cove and concealed backing-angle configuration.

Matériaux de base	Extruded EN AW-6063 aluminium coved facing with a separate aluminium backing angle
Panneau épaisseur	1.2-1.5 mm nominal coved-facing wall thickness
Largeur effective	100 mm overall across two equal 50 mm returns
Longueur maximale	Jusqu'à 3000 mm par profil continu
Acier face épaisseur	0 mm; the selected assembly has no steel facing
Densité Core	Approximately 2700 kg/m³ for the aluminium extrusions
Conductivité thermique	Environ 190 - 200 W / (m · K) à 20 ° C
surface finie	RAL 9010 fine-texture polyester powder-coated facing with a natural aluminium backing angle
Type joint	Two-part clip-on corner assembly with straight butt joints and sealable longitudinal edges
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Alternative 40 mm or 45 mm internal radiiNatural anodized or panel-matched powder-coated finishesFactory-cut lengths below the 3000 mm maximumMatching end closures and three-way internal corner piecesWall-to-wall, wall-to-ceiling and wall-to-floor installation sets

Planning a Cleanroom Coving Profile specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe