Purified Water storage tank three-quarter view with sanitary fittings

Sistem Utiliti Bilik Bersih

Tangki Penyimpanan Air Tulen

A drainable 316L stainless steel holding tank engineered to buffer Purified Water while supporting hygienic recirculation, venting and in-place cleaning.

Drainable hygienic vessel geometry
316L product-contact construction
Loop-ready vent, spray and level fittings

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This vertical storage vessel provides controlled hold-up between a Purified Water generator and its continuously recirculating distribution loop. A dished bottom directs water toward the low-point outlet, while hygienic top connections accommodate a vent filter, spray device, level instrument and return line. Product-contact welds and internal surfaces are finished for effective cleaning and visual inspection.

Ciri-ciri Utama

Vertical cylindrical shell with drainable dished bottom

316L stainless steel product-contact surfaces

Hygienic side manway for internal inspection

Top-mounted spray device connection for cleaning coverage

Sanitary vent-filter and level-instrument ports

Low-point outlet arranged for distribution-loop feed

Four-leg support frame with adjustable feet

Kebimbangan Produk Pelanggan

A Purified Water tank must provide useful buffer capacity without introducing stagnant pockets, poorly wetted surfaces or uncontrolled air exchange.

Residual water remains after drainingUse a sloped dished bottom, a true low-point outlet and drainable sanitary branches sized for the selected vessel geometry.

Tank surfaces are difficult to clean consistentlyPosition a fixed spray device and return connection to wet the internal shell, head and fitting shadow areas during the defined cleaning cycle.

Air exchange threatens stored-water hygieneFit a correctly sized hygienic vent-filter assembly with a drainable housing and service access above the vessel.

Level swings disrupt loop operationIntegrate continuous level measurement and independent high or low level switching for coordinated generator and distribution-pump control.

Permohonan yang biasa

Pharmaceutical Purified Water generation systemsBiotechnology process-water utilitiesCosmetic and personal-care purified-water loopsNutraceutical manufacturing water systemsLaboratory and pilot-plant PW storage

Parameter teknikal

Representative construction ranges are selected according to storage volume, loop demand, sanitization method and installation envelope.

Bahan Teras	316L stainless steel product-contact shell, heads, nozzles and internal fittings
Ketebalan Panel	Vessel shell typically 2.0–6.0 mm according to diameter and design condition
Lebar berkesan	Vessel diameter typically 600–2400 mm
Panjang maksimum	Overall vessel height typically up to 5000 mm
Keluli Menghadapi Ketebalan	Optional stainless jacket or external cladding typically 0.8–1.5 mm
Ketumpatan teras	316L stainless steel density approximately 8000 kg/m³
Kekonduksian Terma	316L stainless steel approximately 15 W/(m·K) at ambient temperature
Kemasan permukaan	Hygienic mechanically polished or electropolished internal surface with satin external finish
Jenis Bersatu	Orbital-weld-ready sanitary tube stubs with clamp or welded hygienic instrument connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Atmospheric or low-pressure vessel configurationInsulation and stainless outer jacketRotary spray head or fixed spray ballHydrophobic vent-filter housingRadar, load-cell or pressure level measurementTemperature, conductivity and sample portsHeating jacket for hot-water sanitizationCustomized support legs and access platform

Planning a Purified Water Storage Tank specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami