Purified Water storage tank three-quarter view with sanitary fittings

클린룸 유틸리티 시스템

정화수 저장 탱크 Purified Water Storage Tank

A drainable 316L stainless steel holding tank engineered to buffer Purified Water while supporting hygienic recirculation, venting and in-place cleaning.

Drainable hygienic vessel geometry
316L product-contact construction
Loop-ready vent, spray and level fittings

견적 요청 제품 찾아보기

상품 소개

This vertical storage vessel provides controlled hold-up between a Purified Water generator and its continuously recirculating distribution loop. A dished bottom directs water toward the low-point outlet, while hygienic top connections accommodate a vent filter, spray device, level instrument and return line. Product-contact welds and internal surfaces are finished for effective cleaning and visual inspection.

주요 기능

Vertical cylindrical shell with drainable dished bottom

316L stainless steel product-contact surfaces

Hygienic side manway for internal inspection

Top-mounted spray device connection for cleaning coverage

Sanitary vent-filter and level-instrument ports

Low-point outlet arranged for distribution-loop feed

Four-leg support frame with adjustable feet

고객 제품 관심사

A Purified Water tank must provide useful buffer capacity without introducing stagnant pockets, poorly wetted surfaces or uncontrolled air exchange.

Residual water remains after drainingUse a sloped dished bottom, a true low-point outlet and drainable sanitary branches sized for the selected vessel geometry.

Tank surfaces are difficult to clean consistentlyPosition a fixed spray device and return connection to wet the internal shell, head and fitting shadow areas during the defined cleaning cycle.

Air exchange threatens stored-water hygieneFit a correctly sized hygienic vent-filter assembly with a drainable housing and service access above the vessel.

Level swings disrupt loop operationIntegrate continuous level measurement and independent high or low level switching for coordinated generator and distribution-pump control.

일반적인 응용 프로그램

Pharmaceutical Purified Water generation systemsBiotechnology process-water utilitiesCosmetic and personal-care purified-water loopsNutraceutical manufacturing water systemsLaboratory and pilot-plant PW storage

기술 매개변수

Representative construction ranges are selected according to storage volume, loop demand, sanitization method and installation envelope.

핵심 재료	316L stainless steel product-contact shell, heads, nozzles and internal fittings
패널 두께	Vessel shell typically 2.0–6.0 mm according to diameter and design condition
유효 폭	Vessel diameter typically 600–2400 mm
최대 길이	Overall vessel height typically up to 5000 mm
강철 면면 두께	Optional stainless jacket or external cladding typically 0.8–1.5 mm
코어 밀도	316L stainless steel density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at ambient temperature
표면 마무리	Hygienic mechanically polished or electropolished internal surface with satin external finish
접합 유형	Orbital-weld-ready sanitary tube stubs with clamp or welded hygienic instrument connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Atmospheric or low-pressure vessel configurationInsulation and stainless outer jacketRotary spray head or fixed spray ballHydrophobic vent-filter housingRadar, load-cell or pressure level measurementTemperature, conductivity and sample portsHeating jacket for hot-water sanitizationCustomized support legs and access platform

Planning a Purified Water Storage Tank specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.