Purified Water storage tank three-quarter view with sanitary fittings

クリーンルームユーティリティシステム

純水貯蔵タンク

A drainable 316L stainless steel holding tank engineered to buffer Purified Water while supporting hygienic recirculation, venting and in-place cleaning.

Drainable hygienic vessel geometry
316L product-contact construction
Loop-ready vent, spray and level fittings

見積もりリクエスト製品案内

商品紹介

This vertical storage vessel provides controlled hold-up between a Purified Water generator and its continuously recirculating distribution loop. A dished bottom directs water toward the low-point outlet, while hygienic top connections accommodate a vent filter, spray device, level instrument and return line. Product-contact welds and internal surfaces are finished for effective cleaning and visual inspection.

主要な特徴

Vertical cylindrical shell with drainable dished bottom

316L stainless steel product-contact surfaces

Hygienic side manway for internal inspection

Top-mounted spray device connection for cleaning coverage

Sanitary vent-filter and level-instrument ports

Low-point outlet arranged for distribution-loop feed

Four-leg support frame with adjustable feet

お客様の製品に関する懸念事項

A Purified Water tank must provide useful buffer capacity without introducing stagnant pockets, poorly wetted surfaces or uncontrolled air exchange.

Residual water remains after drainingUse a sloped dished bottom, a true low-point outlet and drainable sanitary branches sized for the selected vessel geometry.

Tank surfaces are difficult to clean consistentlyPosition a fixed spray device and return connection to wet the internal shell, head and fitting shadow areas during the defined cleaning cycle.

Air exchange threatens stored-water hygieneFit a correctly sized hygienic vent-filter assembly with a drainable housing and service access above the vessel.

Level swings disrupt loop operationIntegrate continuous level measurement and independent high or low level switching for coordinated generator and distribution-pump control.

典型的な用途

Pharmaceutical Purified Water generation systemsBiotechnology process-water utilitiesCosmetic and personal-care purified-water loopsNutraceutical manufacturing water systemsLaboratory and pilot-plant PW storage

技術的なパラメータ

Representative construction ranges are selected according to storage volume, loop demand, sanitization method and installation envelope.

コア材料	316L stainless steel product-contact shell, heads, nozzles and internal fittings
パネルの厚さ	Vessel shell typically 2.0–6.0 mm according to diameter and design condition
有効幅	Vessel diameter typically 600–2400 mm
最大長さ	Overall vessel height typically up to 5000 mm
鋼鉄の厚さを直面する	Optional stainless jacket or external cladding typically 0.8–1.5 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Hygienic mechanically polished or electropolished internal surface with satin external finish
ジョイントタイプ	Orbital-weld-ready sanitary tube stubs with clamp or welded hygienic instrument connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Atmospheric or low-pressure vessel configurationInsulation and stainless outer jacketRotary spray head or fixed spray ballHydrophobic vent-filter housingRadar, load-cell or pressure level measurementTemperature, conductivity and sample portsHeating jacket for hot-water sanitizationCustomized support legs and access platform

Planning a Purified Water Storage Tank specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する