Cleanroom garment finishing equipment three-quarter main view

Pembersihan bilik bersih, pembasmian kuman dan pensterilan

Peralatan Penamat Pakaian Bilik Bersih

A stainless vacuum-and-blow finishing station with a heated buck, sleeve board, suspended steam iron, and foot-operated airflow controls for processed cleanroom garments.

Vacuum holds technical garments flat during finishing
Blowing airflow supports delicate linings and shaped areas
Suspended steam iron and sleeve board improve operator access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Cleanroom garment finishing equipment is intended for the controlled post-dry preparation of coveralls, hoods, sleeves, and compatible textile accessories. The brushed stainless cabinet encloses the airflow components and provides a smooth exterior for routine wiping. A shaped padded buck supports large garment panels, the upright sleeve board reaches narrow areas, and the suspended iron supplies localized steam and heat. The final operating recipe should follow the garment manufacturer’s care limits and the facility’s validated laundry procedure.

Ciri-ciri Utama

Stainless cabinet and structural frame with cleanable exterior surfaces

Heated padded buck for a dry, stable finishing surface

Integral vacuum to hold fabric and remove residual moisture

Blowing mode for lightweight fabrics, seams, and linings

Narrow upright sleeve board for difficult garment sections

Suspended steam hose and iron-balancer arrangement

Separate foot pedals for hands-free airflow control

Local touchscreen for adjustable operating settings

Kebimbangan Produk Pelanggan

Reusable cleanroom garments must be presented without damaging closures, conductive features, or low-lint fabrics. Uncontrolled heat can glaze or distort textiles, and an unsupported garment can crease again before protected packing.

Can the station protect temperature-sensitive garment materials?Adjustable surface heat, localized steam, and defined dwell times allow the finishing recipe to remain within the garment supplier’s care limits.

How are large panels held without creating new creases?Vacuum stabilizes the garment against the padded buck while the operator works across the panel.

Can sleeves and narrow sections be finished effectively?The separate upright sleeve board provides a smaller shaped surface for cuffs, sleeves, and other confined areas.

How is moisture managed after steam finishing?Vacuum airflow draws steam and residual moisture through the buck, while blowing can lift lightweight layers before cooling.

Permohonan yang biasa

Pharmaceutical cleanroom garment laundriesSemiconductor coverall preparationMedical-device controlled laundry supportBiotechnology gown processingLow-lint technical textile service centersPre-packing inspection and presentation stations

Parameter teknikal

The finishing station combines a padded utility buck, controllable vacuum and blowing airflow, an industrial steam iron, and a narrow sleeve board on one cleanable frame. Foot controls let the operator stabilize or lift the fabric without releasing the garment, while the overhead gantry keeps the steam hose away from the work surface.

Bahan Teras	Brushed stainless-steel cabinet and frame with heat-resistant padded working buck
Ketebalan Panel	25–45 mm padded and insulated working-surface build-up
Lebar berkesan	1200–1400 mm usable garment-finishing buck length
Panjang maksimum	1400–2200 mm overall equipment length depending on buck and gantry configuration
Keluli Menghadapi Ketebalan	1.0–1.5 mm stainless-steel cabinet facing
Ketumpatan teras	30–60 kg/m³ heat-resistant padding and insulation where fitted
Kekonduksian Terma	0.035–0.050 W/(m·K) for insulated padded sections
Kemasan permukaan	Brushed stainless exterior with light-gray heat-resistant buck cover
Jenis Bersatu	Bolted frame joints, removable padded cover, steam-hose coupling, and serviceable airflow connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Vacuum-only or vacuum-and-blow airflowElectric buck heatingIntegrated or external steam supplySteam iron with balancer and overhead hose gantrySleeve, shoulder, or utility buck configurationsAdjustable airflow strengthTouchscreen recipe controlsFull stainless external construction

Planning a Cleanroom Garment Finishing Equipment specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami