日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
クリーンルームの清掃 · 消毒 · 滅菌
クリーンルームの衣服の仕上げ装置
A stainless vacuum-and-blow finishing station with a heated buck, sleeve board, suspended steam iron, and foot-operated airflow controls for processed cleanroom garments.
- Vacuum holds technical garments flat during finishing
- Blowing airflow supports delicate linings and shaped areas
- Suspended steam iron and sleeve board improve operator access
商品紹介
Cleanroom garment finishing equipment is intended for the controlled post-dry preparation of coveralls, hoods, sleeves, and compatible textile accessories. The brushed stainless cabinet encloses the airflow components and provides a smooth exterior for routine wiping. A shaped padded buck supports large garment panels, the upright sleeve board reaches narrow areas, and the suspended iron supplies localized steam and heat. The final operating recipe should follow the garment manufacturer’s care limits and the facility’s validated laundry procedure.
主要な特徴
Heated padded buck for a dry, stable finishing surface
Integral vacuum to hold fabric and remove residual moisture
Blowing mode for lightweight fabrics, seams, and linings
Narrow upright sleeve board for difficult garment sections
Suspended steam hose and iron-balancer arrangement
Separate foot pedals for hands-free airflow control
Local touchscreen for adjustable operating settings
お客様の製品に関する懸念事項
Reusable cleanroom garments must be presented without damaging closures, conductive features, or low-lint fabrics. Uncontrolled heat can glaze or distort textiles, and an unsupported garment can crease again before protected packing.
Can the station protect temperature-sensitive garment materials?Adjustable surface heat, localized steam, and defined dwell times allow the finishing recipe to remain within the garment supplier’s care limits.
How are large panels held without creating new creases?Vacuum stabilizes the garment against the padded buck while the operator works across the panel.
Can sleeves and narrow sections be finished effectively?The separate upright sleeve board provides a smaller shaped surface for cuffs, sleeves, and other confined areas.
How is moisture managed after steam finishing?Vacuum airflow draws steam and residual moisture through the buck, while blowing can lift lightweight layers before cooling.
典型的な用途
Pharmaceutical cleanroom garment laundriesSemiconductor coverall preparationMedical-device controlled laundry supportBiotechnology gown processingLow-lint technical textile service centersPre-packing inspection and presentation stations
技術的なパラメータ
The finishing station combines a padded utility buck, controllable vacuum and blowing airflow, an industrial steam iron, and a narrow sleeve board on one cleanable frame. Foot controls let the operator stabilize or lift the fabric without releasing the garment, while the overhead gantry keeps the steam hose away from the work surface.
| コア材料 | Brushed stainless-steel cabinet and frame with heat-resistant padded working buck |
|---|---|
| パネルの厚さ | 25–45 mm padded and insulated working-surface build-up |
| 有効幅 | 1200–1400 mm usable garment-finishing buck length |
| 最大長さ | 1400–2200 mm overall equipment length depending on buck and gantry configuration |
| 鋼鉄の厚さを直面する | 1.0–1.5 mm stainless-steel cabinet facing |
| コア密度 | 30–60 kg/m³ heat-resistant padding and insulation where fitted |
| 熱伝導率 | 0.035–0.050 W/(m·K) for insulated padded sections |
| 表面仕上げ | Brushed stainless exterior with light-gray heat-resistant buck cover |
| ジョイントタイプ | Bolted frame joints, removable padded cover, steam-hose coupling, and serviceable airflow connections |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Vacuum-only or vacuum-and-blow airflowElectric buck heatingIntegrated or external steam supplySteam iron with balancer and overhead hose gantrySleeve, shoulder, or utility buck configurationsAdjustable airflow strengthTouchscreen recipe controlsFull stainless external construction
Planning a Cleanroom Garment Finishing Equipment specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
