Complete empty FOUP transport cart in front-left three-quarter view

클린룸 재료 취급 및 보관

FOUP 운송 카트

A two-level stainless FOUP transport cart with dark static-dissipative shelf mats, triangular locator pins, raised retaining ledges, conductive casters and grounding chain.

Three-point locator sets position each 300 mm FOUP consistently on the shelf
Static-dissipative mats and grounding options support charge-controlled handling
Raised three-sided ledges keep carriers inside the cart footprint during movement

견적 요청 제품 찾아보기

상품 소개

The FOUP transport cart provides dedicated manual mobility for closed 300 mm wafer carriers between semiconductor process and storage points. Each solid stainless shelf holds a replaceable static-dissipative mat and a three-pin locator pattern aligned to the carrier base. Three raised shelf edges protect the load envelope, while the open front supports direct placement and retrieval. The welded frame, integrated handle and conductive rolling hardware are selected for controlled cleanroom movement.

주요 기능

Two dedicated carrier positions separate loads and limit stacking-related handling.

Three locator pins on each shelf establish repeatable carrier orientation.

Dark ESD mats cushion the base and provide a controlled contact surface.

Raised rear and side ledges resist carrier migration without obstructing front loading.

Conductive casters and a grounding chain provide configurable charge-dissipation paths.

고객 제품 관심사

Generic carts do not positively locate FOUP bases, allow carriers to shift during turns and may accumulate charge beneath sensitive wafer enclosures.

Carrier misalignment on the shelfA dedicated three-point locator pattern establishes repeatable orientation.

Sliding during accelerationStatic-dissipative mats and three raised ledges retain the carrier footprint.

Electrostatic charge buildupConductive casters, bonded frame and grounding-chain options create defined dissipation paths.

Cleaning around loose accessoriesMats are removable and the welded stainless frame exposes accessible wipe-down surfaces.

일반적인 응용 프로그램

Manual movement and temporary staging of 300 mm FOUPs or compatible front-opening wafer carriers at load ports, metrology stations, stocker interfaces and semiconductor cleanroom work cells.

기술 매개변수

Locator-pin coordinates must match the target FOUP bottom interface so the carrier rests on its intended support features rather than on the shell. Shelf stiffness, mat thickness and ledge clearance are chosen around loaded mass and operator access. The stainless frame transfers shelf loads to four corner casters; grounding continuity between shelves, frame and rolling hardware is verified for the supplied configuration.

핵심 재료	304 or 316L stainless steel frame with static-dissipative polymer shelf mats
패널 두께	1.2–2.0 mm solid stainless shelf pans
유효 폭	420–650 mm usable shelf width
최대 길이	Up to 900 mm overall cart length
강철 면면 두께	1. 2 - 2. 0 mm 노출된 스테인레스 선반 표면
코어 밀도	7900 - 8000 kg / m 3 명칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	약 14. 6 - 16. 2 W / (m · K) 실온에서
표면 마무리	Fine-brushed or electropolished stainless steel with removable textured ESD mats
접합 유형	Continuously welded square-tube frame with retained solid shelves, three-point locator sets and swivel casters
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 or 316L stainless steel, one or two FOUP levels, carrier-specific locator pattern, replaceable ESD mat, conductive casters, grounding chain, spring-loaded wheels, parking brakes, RFID holder and protective front restraint.

Planning a FOUP Transport Cart specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.