Skid-mounted reverse osmosis water system three-quarter front view

クリーンルームユーティリティシステム

逆浸透水システム

A skid-mounted reverse osmosis system configured around feed-water quality, target permeate conductivity and required production capacity.

Single-pass or double-pass configuration
Online permeate quality monitoring
Hygienic stainless process piping

見積もりリクエスト製品案内

商品紹介

The packaged system combines cartridge prefiltration, high-pressure pumping, spiral-wound membrane vessels, hygienic process piping and automated controls on a compact structural skid.

主要な特徴

Configurable membrane architecture

Conductivity, pressure, flow and temperature monitoring

Automatic flush and quality diversion

Accessible sampling and cleaning connections

Optional plant communication

お客様の製品に関する懸念事項

Feed variability, startup quality and membrane maintenance are addressed through application-specific pretreatment and control logic.

Variable feed-water qualitySelect pretreatment, conditioning and the membrane array from a current feed-water analysis.

Unstable permeate conductivityUse continuous conductivity monitoring, startup diversion and an optional second pass.

High water and energy useApply low-energy membranes, variable-frequency pumping and suitable concentrate recycle.

Difficult cleaningProvide front-access instruments, isolation valves, removable elements and dedicated cleaning connections.

典型的な用途

Pharmaceutical purified-water trainsBiotechnology and laboratory central waterCosmetic process waterElectronics rinsingBoiler and sterilizer utility water

技術的なパラメータ

All performance settings remain configurable to the feed-water analysis, capacity and intended downstream process.

コア材料	Thin-film composite polyamide reverse osmosis membrane elements
パネルの厚さ	Membrane element diameter and pressure-vessel configuration selected in mm to suit capacity
有効幅	Skid width typically 800–2200 mm, configuration dependent
最大長さ	Skid length typically up to 6000 mm, configuration dependent
鋼鉄の厚さを直面する	Stainless-steel skid and enclosure sheet typically 1.5–3.0 mm where used
コア密度	構造材料密度 304 ステンレス鋼の場合約 7930 kg / m3
熱伝導率	ステンレス鋼構造部品周囲温度で約 16.2 W / （ m · K ）
表面仕上げ	Brushed or bead-blasted stainless steel with controlled hygienic tubing finish
ジョイントタイプ	Orbital-welded hygienic tubing with sanitary clamp service connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-pass or double-pass RO304 または 316L の配管Integrated pretreatmentDosing modulesEDI or UV polishing interfaceClean-in-place connectionsRemote data communication

Planning a Reverse Osmosis Water System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する