Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes utilitaires Cleanroom
Système d'eau à osmose inverse
A skid-mounted reverse osmosis system configured around feed-water quality, target permeate conductivity and required production capacity.
- Single-pass or double-pass configuration
- Online permeate quality monitoring
- Hygienic stainless process piping
Introduction de produit
The packaged system combines cartridge prefiltration, high-pressure pumping, spiral-wound membrane vessels, hygienic process piping and automated controls on a compact structural skid.
Key Features
Conductivity, pressure, flow and temperature monitoring
Automatic flush and quality diversion
Accessible sampling and cleaning connections
Optional plant communication
Préoccupations du client produit
Feed variability, startup quality and membrane maintenance are addressed through application-specific pretreatment and control logic.
Variable feed-water qualitySelect pretreatment, conditioning and the membrane array from a current feed-water analysis.
Unstable permeate conductivityUse continuous conductivity monitoring, startup diversion and an optional second pass.
High water and energy useApply low-energy membranes, variable-frequency pumping and suitable concentrate recycle.
Difficult cleaningProvide front-access instruments, isolation valves, removable elements and dedicated cleaning connections.
Les applications typiques
Pharmaceutical purified-water trainsBiotechnology and laboratory central waterCosmetic process waterElectronics rinsingBoiler and sterilizer utility water
Paramètres techniques
All performance settings remain configurable to the feed-water analysis, capacity and intended downstream process.
| Matériaux de base | Thin-film composite polyamide reverse osmosis membrane elements |
|---|---|
| Panneau épaisseur | Membrane element diameter and pressure-vessel configuration selected in mm to suit capacity |
| Largeur effective | Skid width typically 800–2200 mm, configuration dependent |
| Longueur maximale | Skid length typically up to 6000 mm, configuration dependent |
| Acier face épaisseur | Stainless-steel skid and enclosure sheet typically 1.5–3.0 mm where used |
| Densité Core | Structural material density approximately 7930 kg/m³ for 304 stainless steel |
| Conductivité thermique | Stainless-steel structural components approximately 16.2 W/(m·K) at ambient temperature |
| surface finie | Brushed or bead-blasted stainless steel with controlled hygienic tubing finish |
| Type joint | Orbital-welded hygienic tubing with sanitary clamp service connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single-pass or double-pass RO304 or 316L pipingIntegrated pretreatmentDosing modulesEDI or UV polishing interfaceClean-in-place connectionsRemote data communication
Planning a Reverse Osmosis Water System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
