Three-quarter view of white positive-pressure HEPA supply unit with blue top duct collar and casters

FFU およびターミナル空気浄化装置

正圧 HEPA 空気供給ユニット

A portable duct-ready blower that draws source air through staged filtration and delivers HEPA-filtered air into a room to establish a controlled outward pressure bias.

Filtered Supply Air
Duct-Ready Positive Flow
Variable EC Blower
Sealed HEPA Final Stage

見積もりリクエスト製品案内

商品紹介

The positive-pressure HEPA air supply unit is arranged with a protected intake, coarse prefilter, optional molecular stage, EC centrifugal blower and final HEPA cassette. Clean air exits through a sealed round supply collar that can connect to a temporary room, enclosure or clean booth. A variable-speed controller sets the delivered airflow, while a filter pressure gauge indicates increasing resistance. Because the unit adds filtered air rather than exhausting room air, pressure is established only when the served enclosure and relief path are appropriately sized.

主要な特徴

A sealed discharge collar connects filtered supply air directly to a temporary controlled enclosure.

The final HEPA stage is positioned downstream of the blower to capture particles released inside the unit.

Variable EC drive allows the supply volume to be matched to leakage and relief airflow.

A differential-pressure gauge provides a visible indication of combined filter loading.

お客様の製品に関する懸念事項

A temporary clean enclosure needs controlled filtered make-up air, not merely room-air recirculation, to maintain outward leakage at openings.

A recirculating purifier reduces particles but does not add enough air to create positive pressure.The ducted outlet supplies HEPA-filtered air from outside the served enclosure.

Leakage varies when doors, cable openings or softwall panels move.Variable fan control allows the supply flow to be adjusted to the actual leakage path.

Particles from a fan or internal cabinet surface can enter the protected space.The downstream HEPA cassette filters the complete airflow immediately before discharge.

Operators cannot see when accumulated dust is reducing the delivered airflow.A filter pressure indicator shows the resistance trend across the installed stages.

典型的な用途

Temporary positive-pressure cleanroomsPortable inspection enclosuresClean construction zonesSensitive equipment protectionEmergency clean-air supply

技術的なパラメータ

Typical construction ranges for a portable positive-pressure HEPA supply unit are shown below.

コア材料	EC centrifugal blower with prefilter, optional carbon stage and downstream micro-glass H13-H14 HEPA filter
パネルの厚さ	450-800 mm enclosure depth
有効幅	500-900 mm cabinet width
最大長さ	Up to 1200 mm overall unit height including caster base
鋼鉄の厚さを直面する	1.0-1.5 mm powder-coated steel or 304 stainless-steel pressure enclosure
コア密度	Approximately 90-120 kg/m³ compacted density of the HEPA pack used in the positive-pressure supply unit
熱伝導率	Approximately 0.035-0.043 W/(m·K) for the HEPA pack used in the positive-pressure air supply path
表面仕上げ	Cleanroom-white powder coat with blue supply collar, stainless handles and non-marking casters
ジョイントタイプ	Gasketed filter tracks with clamped access door and sealed round or rectangular clean-air supply flange
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Round or rectangular supply connectionHEPA H13 or H14 final stagePrefilter and carbon configurationsCaster-mounted or stationary base

Planning a Positive-Pressure HEPA Air Supply Unit specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する