日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
商品紹介
The Medical Waste Pass Box is a through-wall dirty hatch for removing sealed clinical waste and used consumable packs from an operating room to an adjacent soiled holding area without opening the personnel door. Its double-wall AISI 316L stainless housing contains two opposing solid doors, keeping waste contents out of sight and separating the interlock hardware from the wipe-clean transfer space. A no-touch sensor requests door release, while local green and red indicators show whether access is available or retained by the opposite side. Inside, welded coved transitions guide incidental liquid toward a shallow removable tray beneath the chamber so the tray can be withdrawn for separate cleaning. This is a static transfer hatch: it does not include a recirculating fan, HEPA filter or sterilization cycle.
主要な特徴
Solid stainless door panels conceal discarded materials and avoid a glazed ledge around the waste-transfer opening.
The empty 316L chamber uses radiused internal transitions and a continuous gasket line for accessible routine wipe-down.
A raised-edge stainless spill tray slides out independently to contain and remove incidental leakage below the transfer floor.
お客様の製品に関する懸念事項
Waste transfer at a clinical clean-to-soiled boundary must prevent a simultaneous opening, minimize hand contact and keep unexpected leakage accessible for removal.
Carrying bagged waste through the operating-room personnel door increases traffic and interrupts the intended clean-to-dirty route.The dedicated through-wall chamber sends sealed waste directly to the adjacent soiled side without routine staff passage through the main door.
Two open hatch doors can form an uncontrolled direct path between the operating room and dirty holding area.The electronic interlock retains the opposing solid door whenever one transfer side has been released.
Waste handling can contaminate pull handles and leave difficult-to-clean crevices around the chamber.Infrared request sensors remove the routine hand-grip step, while the coved stainless interior reduces ledges around the load path.
A punctured or incompletely closed waste bag can release liquid into a fixed cabinet floor.The raised-edge tray collects incidental leakage below the chamber and can be removed separately for cleaning and inspection.
典型的な用途
Operating-room waste removal to a dirty corridorSurgical-suite used-consumable transferProcedure-room soiled-material segregationHealthcare clean-to-soiled utility interfaces
技術的なパラメータ
Typical configurable construction values for a solid-door 316L operating-room medical waste pass box are listed below.
| コア材料 | Double-wall AISI 316L stainless steel chamber and solid doors with silicone perimeter gaskets, electronic interlock and removable spill tray |
|---|---|
| パネルの厚さ | 50-80 mm double-wall housing and solid-door section |
| 有効幅 | 500-700 mm clear waste-transfer chamber width |
| 最大長さ | Up to 800 mm configurable clear chamber depth |
| 鋼鉄の厚さを直面する | 1.2-1.5 mm AISI 316L stainless sheet |
| コア密度 | 8000 kg/m³ for AISI 316L stainless steel |
| 熱伝導率 | 15 W/(m·K) for AISI 316L stainless steel at room temperature |
| 表面仕上げ | Neutral satin brushed 316L stainless steel with polished welds, coved corners and passivated cleanable surfaces |
| ジョイントタイプ | Continuously welded double-wall chamber with gasketed opposing solid doors, electronic interlock and seated removable spill tray |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Clear chamber dimensions selected for the intended waste container or bag sizeSatin brushed or electropolished 316L internal finishFront and rear flange depths matched to the wall constructionLeft- or right-hand door hinging matched to the clinical waste route
Planning a Medical Waste Pass Box specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
