Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de salle blanche spécifique à l'industrie
Boîte de déchets médicaux
A solid-door 316L stainless dirty hatch with touchless release, opposing electronic interlocks, a coved transfer chamber and a removable liquid-containment tray.
- Solid Blind Double Doors
- Touchless Interlocked Access
- Removable Spill Tray
- 316L Coved Chamber
Introduction de produit
The Medical Waste Pass Box is a through-wall dirty hatch for removing sealed clinical waste and used consumable packs from an operating room to an adjacent soiled holding area without opening the personnel door. Its double-wall AISI 316L stainless housing contains two opposing solid doors, keeping waste contents out of sight and separating the interlock hardware from the wipe-clean transfer space. A no-touch sensor requests door release, while local green and red indicators show whether access is available or retained by the opposite side. Inside, welded coved transitions guide incidental liquid toward a shallow removable tray beneath the chamber so the tray can be withdrawn for separate cleaning. This is a static transfer hatch: it does not include a recirculating fan, HEPA filter or sterilization cycle.
Key Features
Solid stainless door panels conceal discarded materials and avoid a glazed ledge around the waste-transfer opening.
The empty 316L chamber uses radiused internal transitions and a continuous gasket line for accessible routine wipe-down.
A raised-edge stainless spill tray slides out independently to contain and remove incidental leakage below the transfer floor.
Préoccupations du client produit
Waste transfer at a clinical clean-to-soiled boundary must prevent a simultaneous opening, minimize hand contact and keep unexpected leakage accessible for removal.
Carrying bagged waste through the operating-room personnel door increases traffic and interrupts the intended clean-to-dirty route.The dedicated through-wall chamber sends sealed waste directly to the adjacent soiled side without routine staff passage through the main door.
Two open hatch doors can form an uncontrolled direct path between the operating room and dirty holding area.The electronic interlock retains the opposing solid door whenever one transfer side has been released.
Waste handling can contaminate pull handles and leave difficult-to-clean crevices around the chamber.Infrared request sensors remove the routine hand-grip step, while the coved stainless interior reduces ledges around the load path.
A punctured or incompletely closed waste bag can release liquid into a fixed cabinet floor.The raised-edge tray collects incidental leakage below the chamber and can be removed separately for cleaning and inspection.
Les applications typiques
Operating-room waste removal to a dirty corridorSurgical-suite used-consumable transferProcedure-room soiled-material segregationHealthcare clean-to-soiled utility interfaces
Paramètres techniques
Typical configurable construction values for a solid-door 316L operating-room medical waste pass box are listed below.
| Matériaux de base | Double-wall AISI 316L stainless steel chamber and solid doors with silicone perimeter gaskets, electronic interlock and removable spill tray |
|---|---|
| Panneau épaisseur | 50-80 mm double-wall housing and solid-door section |
| Largeur effective | 500-700 mm clear waste-transfer chamber width |
| Longueur maximale | Up to 800 mm configurable clear chamber depth |
| Acier face épaisseur | 1.2-1.5 mm AISI 316L stainless sheet |
| Densité Core | 8000 kg/m³ for AISI 316L stainless steel |
| Conductivité thermique | 15 W/(m·K) for AISI 316L stainless steel at room temperature |
| surface finie | Neutral satin brushed 316L stainless steel with polished welds, coved corners and passivated cleanable surfaces |
| Type joint | Continuously welded double-wall chamber with gasketed opposing solid doors, electronic interlock and seated removable spill tray |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Clear chamber dimensions selected for the intended waste container or bag sizeSatin brushed or electropolished 316L internal finishFront and rear flange depths matched to the wall constructionLeft- or right-hand door hinging matched to the clinical waste route
Planning a Medical Waste Pass Box specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
