Complete low-flow suit wet-down shower with stainless chamber and dual doors

인력 및 재료 오염 제거 장비

Low - Flow Suit Wet - Down 샤워

A low-consumption protective-suit rinse chamber using zoned water spray to suppress surface dust before removal.

Zoned Low-Flow Sprays
Full-Suit Wetting
Programmed Drip Stage
Serviceable Drain Screen

견적 요청 제품 찾아보기

상품 소개

The low-flow wet-down shower provides more surface wetting than a mist shower without the water demand of a full body wash. Independent upper, middle and boot-level spray bars let the sequence address the whole suit. A removable strainer, flushable branches and a stainless drain pan simplify routine operation in containment change areas.

주요 기능

Three valved spray levels can be timed separately for hood, body and boots.

Full-cone nozzles deposit a controlled water layer without a hard cleaning jet.

An inline strainer protects small nozzle passages from supply debris.

Branch-end flush points help clear sediment after a campaign.

A drip-delay stage reduces water tracking into the clean changing room.

고객 제품 관심사

A wet-down stage must immobilise dust without flooding the exit route or wasting treated water.

A full drench shower uses more water than routine garment wetting needs.Low-flow nozzles apply water only around the occupied suit zone.

One overhead spray misses cuffs and footwear.Upper, middle and lower circuits create height-specific coverage.

Scale blocks the fine nozzles.A cleanable strainer and line-flush connections protect the spray circuit.

Wet suits drip into the dry corridor.The programmed hold period allows drain-down before the exit lock releases.

일반적인 응용 프로그램

Cytotoxic processing exitsFine-chemical pilot plantsNanomaterial suitesControlled waste-transfer rooms

기술 매개변수

Representative dimensions for a zoned suit wet-down shower are shown below.

핵심 재료	PIR-insulated SUS 304 or SUS 316L chamber with low-flow spray bars, strainer and sanitary drain
패널 두께	60-75 mm insulated enclosure panels
유효 폭	900-1300 mm clear spray-zone width
최대 길이	Up to 2000 mm chamber length
강철 면면 두께	1.2-1.5 mm stainless-steel internal skin
코어 밀도	40-45 kg/m³ rigid PIR insulation
열전도도 (Thermal Conductivity)	0.021-0.026 W/(m·K) for the panel insulation
표면 마무리	Brushed stainless steel with coved welds, cleanable spray bars and textured floor
접합 유형	Liquid-tight panel seams with sanitary clamp pipe joints and compression-gasketed doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Heated rinse-water loopAutomatic line flushingBoot-level auxiliary ringConductivity-monitored supply

Planning a Low-Flow Suit Wet-Down Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.