Insulated rectangular duct access door with cam latches and gasket

クリーンルーム空気分配システム

Insulated ダクトアクセスドア

A gasketed double-wall access door that provides repeatable entry for inspection, cleaning and servicing inside rectangular HVAC ducts.

Double-Wall Insulated Panel
Compression Cam Latches
Continuous Perimeter Gasket
Hinged or Lift-Off Design

見積もりリクエスト製品案内

商品紹介

The insulated duct access door mounts into a prepared rectangular opening and provides a rigid, reusable closure for internal inspection. A double-wall metal panel surrounds a non-shedding insulation core, while a continuous closed-cell gasket seals against the frame. Cam latches apply even compression and a piano hinge retains the door in overhead or vertical service positions. The frame edge is hemmed or flanged into the duct wall and sealed externally so cleaning liquids and air do not bypass the opening.

主要な特徴

Double-wall construction limits thermal bridging through insulated supply and return ductwork.

Adjustable cam latches apply repeatable gasket compression after each inspection cycle.

A continuous closed-cell perimeter seal avoids open corners around the access opening.

Hinged and lift-off formats suit overhead, side-wall and restricted-service locations.

お客様の製品に関する懸念事項

An access opening must be large enough for the intended task yet close with the same thermal and leakage integrity as the surrounding duct wall.

A cut sheet-metal cover distorts after repeated removal.A reinforced double-wall door and fixed frame preserve alignment through service cycles.

Warm humid air condenses on a single-skin access panel.Enclosed insulation reduces the temperature difference across the closure.

Uneven screw tightening leaves gaps along the gasket.Multiple cam latches distribute compression around the full perimeter.

Loose insulation fibers are exposed at the door edge.Metal skins and hemmed frame edges completely enclose the insulation core.

典型的な用途

Filter and damper inspectionCoil and humidifier accessDuct cleaning entry pointsFire and smoke damper serviceCleanroom exhaust inspection

技術的なパラメータ

Representative construction ranges for an insulated rectangular duct access door are shown below.

コア材料	Closed-cell elastomeric foam or non-shedding fiberglass insulation enclosed by metal skins
パネルの厚さ	25–50 mm double-wall door depth
有効幅	150–650 mm clear opening width
最大長さ	450 mm standard opening height; up to 650 mm by custom fabrication
鋼鉄の厚さを直面する	0.7–1.0 mm galvanized steel or 304 stainless steel skins
コア密度	32–48 kg/m³ enclosed insulation core
熱伝導率	0.034–0.040 W/(m·K) for the insulated core
表面仕上げ	Galvanized, powder-coated or brushed stainless steel with closed-cell gasket
ジョイントタイプ	Hinged or lift-off frame with continuous gasket and adjustable cam latches
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Galvanized or 304 stainless constructionHinged or lift-off doorRound-duct saddle frameTool-operated or hand cam latches

Planning a Insulated Duct Access Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する