Insulated rectangular duct access door with cam latches and gasket

클린룸 공기 분배 시스템

단열 덕트 액세스 도어

A gasketed double-wall access door that provides repeatable entry for inspection, cleaning and servicing inside rectangular HVAC ducts.

Double-Wall Insulated Panel
Compression Cam Latches
Continuous Perimeter Gasket
Hinged or Lift-Off Design

견적 요청 제품 찾아보기

상품 소개

The insulated duct access door mounts into a prepared rectangular opening and provides a rigid, reusable closure for internal inspection. A double-wall metal panel surrounds a non-shedding insulation core, while a continuous closed-cell gasket seals against the frame. Cam latches apply even compression and a piano hinge retains the door in overhead or vertical service positions. The frame edge is hemmed or flanged into the duct wall and sealed externally so cleaning liquids and air do not bypass the opening.

주요 기능

Double-wall construction limits thermal bridging through insulated supply and return ductwork.

Adjustable cam latches apply repeatable gasket compression after each inspection cycle.

A continuous closed-cell perimeter seal avoids open corners around the access opening.

Hinged and lift-off formats suit overhead, side-wall and restricted-service locations.

고객 제품 관심사

An access opening must be large enough for the intended task yet close with the same thermal and leakage integrity as the surrounding duct wall.

A cut sheet-metal cover distorts after repeated removal.A reinforced double-wall door and fixed frame preserve alignment through service cycles.

Warm humid air condenses on a single-skin access panel.Enclosed insulation reduces the temperature difference across the closure.

Uneven screw tightening leaves gaps along the gasket.Multiple cam latches distribute compression around the full perimeter.

Loose insulation fibers are exposed at the door edge.Metal skins and hemmed frame edges completely enclose the insulation core.

일반적인 응용 프로그램

Filter and damper inspectionCoil and humidifier accessDuct cleaning entry pointsFire and smoke damper serviceCleanroom exhaust inspection

기술 매개변수

Representative construction ranges for an insulated rectangular duct access door are shown below.

핵심 재료	Closed-cell elastomeric foam or non-shedding fiberglass insulation enclosed by metal skins
패널 두께	25–50 mm double-wall door depth
유효 폭	150–650 mm clear opening width
최대 길이	450 mm standard opening height; up to 650 mm by custom fabrication
강철 면면 두께	0.7–1.0 mm galvanized steel or 304 stainless steel skins
코어 밀도	32–48 kg/m³ enclosed insulation core
열전도도 (Thermal Conductivity)	0.034–0.040 W/(m·K) for the insulated core
표면 마무리	Galvanized, powder-coated or brushed stainless steel with closed-cell gasket
접합 유형	Hinged or lift-off frame with continuous gasket and adjustable cam latches
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Galvanized or 304 stainless constructionHinged or lift-off doorRound-duct saddle frameTool-operated or hand cam latches

Planning a Insulated Duct Access Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.