Three-quarter view of a complete translucent replacement electrode humidifier steam cylinder

クリーンルーム機器のスペアパーツ

加湿器蒸気シリンダー

A complete replacement evaporation cylinder that combines the water vessel, immersed electrode set, steam outlet and service interfaces for a matched electrode humidifier.

Complete Electrode Vessel
Integrated Steam Outlet
Plug-In Terminal Layout
O-Ring Drain Interface

見積もりリクエスト製品案内

商品紹介

The humidifier steam cylinder is the removable evaporation vessel at the center of an electrode steam humidifier. Conductive feedwater carries current between the installed metal electrodes, heating the water directly and releasing atmospheric steam through the molded top outlet. The cylinder also groups the power terminals, high-water sensing connection, fill path and bottom drain-valve interface into one service component. Replacement selection must match the humidifier model, steam capacity, supply voltage and phase, electrode arrangement, steam-hose connection and drain seat because cylinders with a similar external size can have different internal and electrical configurations.

主要な特徴

The translucent molded vessel permits a visual check of water level and mineral accumulation without opening the cylinder.

Integrated electrode grids provide the immersed current path required by a compatible conductive-water steam generator.

Color-separated power terminals and a distinct sensor connection support orderly reconnection to the humidifier wiring harness.

A molded steam outlet and O-ring-sealed bottom drain interface allow the complete evaporation chamber to be removed as one service part.

お客様の製品に関する懸念事項

A replacement cylinder must reproduce the original hydraulic, mechanical and electrical interfaces while remaining suitable for the actual supply water and steam duty.

A cylinder that fits the cabinet can still have the wrong electrode configuration for the installed voltage, phase or steam output.The humidifier model, cylinder designation, electrical supply and required capacity are checked together before the replacement is selected.

Different steam-outlet or bottom drain geometries prevent the hoses and drain valve from seating correctly.Outlet diameter, drain bayonet shape, fill connection and new service O-ring are matched to the existing hydraulic interfaces.

Incorrectly reassigned power plugs or a missed level-sensor lead can cause abnormal operation after service.Terminal count, color identification and the separate high-water sensor connection are recorded and restored to their corresponding positions.

Mineral deposits and electrode consumption gradually reduce useful cylinder life and can obstruct normal draining.Cylinder condition is inspected at the maintenance interval and the complete canister is replaced when the applicable humidifier instructions indicate end of service life.

典型的な用途

Cleanroom AHU electrode humidifiersCommercial HVAC duct humidificationProcess-area atmospheric steam generationElectrode humidifier cylinder replacement programs

技術的なパラメータ

The ranges below describe common molded replacement cylinders used in commercial electrode steam humidifiers; the exact cylinder is selected for the compatible equipment model.

コア材料	Translucent heat-resistant polymer vessel with stainless steel electrodes, molded engineering-polymer cap and elastomer seals
パネルの厚さ	3-8 mm nominal molded vessel-wall and cap section
有効幅	140-300 mm nominal cylinder outside diameter
最大長さ	Up to 650 mm overall height including steam outlet and drain interface
鋼鉄の厚さを直面する	1.0-3.0 mm nominal stainless steel electrode-grid thickness
コア密度	Approximately 1190-1210 kg/m³ for representative transparent polycarbonate vessel grades
熱伝導率	Approximately 0.20 W/(m·K) for representative transparent polycarbonate vessel material
表面仕上げ	Smooth translucent clear or pale-blue vessel with dark molded cap and color-identified terminal insulators
ジョイントタイプ	Molded sealed vessel with plug-in electrode terminals, hose-clamped steam outlet and O-ring-seated bottom drain bayonet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Matched humidifier model and cylinder seriesDisposable or serviceable cylinder constructionVoltage- and phase-specific electrode arrangementCompatible steam outlet, drain seat and service O-ring

Planning a Humidifier Steam Cylinder specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する