Three-quarter view of a shallow replacement FFU pre-filter with aluminum frame

クリーンルーム機器のスペアパーツ

FFU 予備フィルター

A shallow coarse-media intake panel that captures fibers and large dust before they reach the FFU fan and final HEPA filter.

Low-Resistance Coarse Media
Shallow FFU Profile
Rigid Aluminum Frame
Easy Service Pull Tabs

見積もりリクエスト製品案内

商品紹介

The FFU pre-filter installs at the fan intake to intercept lint, fibers and coarse particles before they load the impeller or final filter. A shallow aluminum frame holds synthetic media against an expanded-metal support grid, preserving open area under fan suction. Service tabs allow the panel to be removed from a restricted ceiling plenum without disturbing the HEPA filter. Face dimensions, thickness, media grade and airflow direction must match the FFU intake rack.

主要な特徴

Open synthetic media adds limited resistance at normal FFU face velocity.

A rigid shallow frame remains square in the intake track during repeated service.

Expanded-metal support prevents media movement toward the rotating fan.

Pull tabs provide a defined grip point for overhead removal and replacement.

お客様の製品に関する懸念事項

An FFU intake filter must protect the fan without consuming the pressure reserve needed by the final filter.

Coarse debris accumulates on the impeller and changes fan balance.The upstream synthetic layer captures fibers and large particles before they enter the wheel.

A restrictive prefilter reduces airflow through the cleanroom HEPA filter.A shallow, open coarse-media structure preserves a broad effective flow area.

Unsupported media bows inward under fan suction.An expanded-metal grid stabilizes the media across the full panel face.

Flush panels are difficult to remove in a shallow ceiling plenum.Flexible pull tabs provide accessible service grips without adding significant depth.

典型的な用途

Cleanroom fan filter unit intakesLaminar-flow module prefiltrationMini-environment circulation unitsFFU fan and HEPA protection

技術的なパラメータ

Typical construction ranges for FFU intake pre-filters are shown below.

コア材料	Bonded polyester or washable synthetic coarse-filter media with expanded-metal support
パネルの厚さ	10-30 mm nominal filter depth
有効幅	300-610 mm nominal face width
最大長さ	Up to 1220 mm nominal face length
鋼鉄の厚さを直面する	0.4-0.8 mm optional galvanized expanded-metal support grid
コア密度	Approximately 20-45 kg/m³ nominal synthetic-media bulk density
熱伝導率	Approximately 0.035-0.045 W/(m·K) for dry polyester media
表面仕上げ	Natural silver aluminum frame with clean white synthetic media and pull tabs
ジョイントタイプ	Media retained in a mitered shallow frame with bonded or mechanically fixed support grid
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Disposable or washable mediaCustom FFU face dimensionsUpstream or downstream support gridPull-tab location and quantity

Planning a FFU Pre-Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する